- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Two Trees TS3 5 W laser plotter
A laser plotter that can be used for marking, engraving and cutting in a wide variety of materials. The device uses the LD + FAC + C lens technology , which allows to obtain thin and even laser paths. The presented TS3 model has two light sources, allowing to obtain one beam with a power of 5 W. The plotter has a closed housing that increases work safety. It is also equipped with a cooktop extractor.
Two Trees TS3 5 W laser plotter .
Presentation of the Two Trees TS3 laser engraver .
System of lenses and two laser light sources .
Advanced lens system
The LD + FAC + C lens technology, which is used by the Two Trees TS3 optical system, allows for a more focused laser spot. This allows for thinner, smoother and deeper cuts.
Two laser light sources
Two laser light sources used in the device allow to obtain one powerful beam with a power of 5 W. This value is sufficient to work with a wide variety of materials.
Closed housing
Made of metal, tight housing of the device provides additional protection when working with the laser. It also prevents the formation of dust and smoke in the room where the plotter is located.
Multitasking
TS3 is a multifunctional device for engraving, marking and laser cutting various materials. Whether you are a hobbyist or a professional, you can use a laser engraver in a wide variety of projects.
The TS3 has a wide range of possibilities .
Rotary shaft in the TS3 laser engraver .
Safety first and foremost
The TS3 plotter is equipped with a number of protections: flame sensor, fire alarm, intelligent automatic switch-off function and a protective cover to ensure maximum safety of using the device.
Internal rotary attachment
The rotary shaft located under the work table enables cylindrical engraving in the range of 360 °.
Honeycomb work table
The working table located in the closed chamber of the plotter, thanks to the unique honeycomb structure, enables light diffusion. It also provides adequate air flow.
External vapors exhaust pipe
The TS3 is equipped with a dedicated external exhaust with an additional fan, which allows to discharge vapors and particles generated during engraving to the outside (e.g. through a window). This element allows you to avoid dust and smoke in the room in which the device operates.
Cooktop extractor on TS3 .
Examples of projects made with TS3 .
Communication with the user
The TS3 5W plotter offers several modes of communication with the user. The device can be operated via a cable via the USB socket, it also has a TF card slot. The engraving machine can also be operated via WiFi.
A wide range of processing materials
TS3 offers the possibility of marking a wide range of materials, incl. stainless steel, plastic, wood, leather, aluminum, spray coating, etc. A list of all compatible materials, broken down by the type of processing they can be subjected to (marking, engraving and cutting), is available here .
LD + FAC + C lenses
Compared to the LD + C lens technology, the LD + FAC6 + C lens used in the TS3 allows for a deeper cut thanks to clearer and thinner lines. It also leaves fewer traces of burning on the material. This type of optics is also characterized by higher efficiency and working power (97.3% of the 5.23 W laser light is converted into a 5.09 W laser spot). The compressed laser spot is 0.08 mm in size. The light from the LD + FAC + C lenses is collimated.
Laser calibration process .
Specification of the TS3 5W laser plotter
| Technical Specifications | |
|---|---|
| Material of execution: | Aluminum profiles + metal |
| Laser power: | 5W (compressed point laser) |
| Laser Wavelength: | 445 nm +/- 5 nm |
| Engraving field: | 300 x 200 mm |
| XY axis positioning accuracy: | 0.1 mm |
| Engraving Accuracy: | 0.08 mm |
| Engraving Speed: | 10000 mm / min |
| Communication: | USB, TF card, WiFi |
| Engraving materials: | stainless steel, plastic, wood, leather, paper, spray layer etc. |
| Supported file formats: | NC, DXF, BMP, JPG, PNG, GCODE |
| Engraving Mode: | Image carving, Test carving, Scanning carving, Contour carving, Pixel carving |
| Supported Operating Systems: | Windows, Mac |
| Supported software: | LaserGRBL, Lightburn |
| Maximum continuous working time: | ≤ 12 hours |
| Construction dimensions: | 570 x 430 x 270 mm |
| Mass: | 14.4 kg |
