- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Compatible with Arduino robot controller from Dagu. It is a famous version of Nano ATmega 328 microcontroller, which operates at a frequency of 16 MHz. The board also has a motor driver with the parameters of 9V and 2.5 A.
The device can be programmed via the mini-USB port using the Arduino IDE environment. All outputs were displayed on the traditional goldpin connector, raster 2.54 mm, which is already soldered into the board.
Specification
- Supply voltage: 6 V to 9 V
- Built-in voltage regulator
- Microcontroller: Atmega 328
- Clock Speed: 16 MHz
- Flash memory: 32 KB
- RAM: 2 KB SRAM
- EEPROM: 1 KB
- Has a built-in motor driver 2,5 A
- Installed bootloader Arduino Uno, Nano, Pro Mini 5V / 16 MHz
- Pins are out on goldpin soldered connectors - 2.54 mm raster
- Connectors provide the connection from the servo simulation
- Has two holes for mounting
Useful links |
