Czujnik odległości
Czujnik odległości
Czujnik odległości
Czujnik odległości
Czujnik odległości
Czujnik odległości - zdjęcie 1
Czujnik odległości - zdjęcie 2
Czujnik odległości - zdjęcie 3
Czujnik odległości - zdjęcie 4
Czujnik odległości - zdjęcie 5

Digital distance sensor OPB720B-06Z with 7V - 15cm cable

Index: SES-05822
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Optical reflective distance sensor detecting the object in the range from 0.01 cm to 15.2 cm. It has a digital output type - open collector, which changes the logic status when it detects the obstacle. The sensor works with a voltage from 4 V to 7 V,it has a cable with the length of approx. 1.m.

PLN69.11
PLN69.11 tax excl.
Unavailable
Discontinued product
30-day returns
PayPal payment
Manufacturer: Optek

Attention!

The product has been discontinued. Check others products in category.

Description

Optical reflective distance sensor detecting the object in the range from 0.01 cm to 15.2 cm. It has a digital output type - open collector, which changes the logic status when it detects the obstacle. The sensor works with a voltage from 4 V to 7 V,it has a cable with the length of approx. 1.m.

 

The sensor has mounted wire with the removed insulation at the ends.

 

Connection

To run the sensor, just connect three wires:

 

 CableDescription
  Red Supply voltage.
  White Digital output signal, type of open collector.
  Black Ground.

 Cyfrowy czujnik odległości OPB720B-06Z z przewodem- 15cmThe sensor sends a beam of light through the transmititng that is reflected from the obstacle and returns to the receiver.

 

Specification

  • Supply voltage: 4 V to 7 Volts
  • Current consumption: approx. 50 mA
  • Sensor type: reflective, optical
  • Measurement range: from 0.01 cm to 15.2 cm
  • The minimum size of the detected object: 2 mm
  • Filtering the light of the environment: <100k Lux
  • Output signal: digital CMOS/TTL (open collector)
  • Operating temperature: 0 °C to 70 °C
  • Cable length: 99 cm
  • Type of wires: 28 AWG
  • The sensor's size: 17 x 8.5 x 28 mm

 

Voltage to 4.0 V
Voltage from 7.0 V
Interface Digital I / O
Sensor - distance to 15 cm
Sensor - distance from 0 cm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Lichtenstein, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Stepper Motor JK57HS56-2804 200 steps/rot 2,4V/2,8A/1,26Nm

A bipolar stepper motor, four wired. Has a resolution of 200 steps per revolution (1.8 degree). It is supplied with the voltage of 2.4 V, consumes 2800 mA on the coil. Torque:...
Index: MOT-03650
Index: MOT-03650
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN81.22 Price PLN81.22

Hobbywing SkyWalker 50A Brushless ESC Speed Controller With UBEC

Brushless motor controller for current up to 50 A. The optimum power supply is the 2S - 4S li-pol packages (7.4 V to 14.8 V). It has a 5 V / 5 A UBEC controller .
Index: MOD-06108
Index: MOD-06108
Available, 24h shipping!
(Check quantity)
Regular price PLN71.54 Price PLN71.54

StepStick DRV8825 Stepper Motor Driver

Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
Index: MOD-03739
Index: MOD-03739
Czas oczekiwania ok. 10-30 dni
Regular price PLN12.93 Price PLN12.93

Brushless Motor Redox Brushless BBL 1500/1350

Brushless motor with 650 W accessories, supplied from 11.1 V to 14.8 V (LiPo 3S / 4S). Speed is 1350 RPM/V, current draw up to 45 A. Body diameter is 28.0 mm, weight 108 g.
Index: MOT-02876
Index: MOT-02876
Waiting time: about 10-30 days
Regular price PLN69.84 Price PLN69.84

Touch Screen A - LCD 2,2'' 320x240px SPI - Waveshare 4467

Touch screen TFT LCD display with a diagonal of 2.2" and a resolution of 320 x 240 pixels with 262,144 colors. Works with a voltage of 3.3 V and communicates using the SPI bus....
Index: WSR-04474
Index: WSR-04474
Unavailable
Regular price PLN48.70 Price PLN48.70

Force sensor FSR-400 - 2kg round 5mm - Pololu 1695

The force sensor reduces its resistance when the force put to the round tip, accumulates. The sensor is round with a diameter of 5 mm.
Index: PLL-00752
Index: PLL-00752
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN26.75 Price PLN26.75

Force sensor round 5mm (0.25 '') - short connector - Pololu 2727

Pressure sensor reduces its resistance when the force put to the round tip, increases. The sensor with the short connector, round, with about 5 mm diameter.
Index: PLL-02349
Index: PLL-02349
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN26.75 Price PLN26.75

ArduCam MT9D111 2MPx JPEG camera module + lens HQ M12x0.5

Camera module with MT9D111 matrix with a resolution of 2 MPx, and the size of 1/3.2. The speed of data transmission in JPEG format at maximum resolution of 1600 x 1200 px, is...
Index: ACM-06675
Index: ACM-06675
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN77.24 Price PLN77.24

WiFi module ESP-03 ESP8266 - 7 GPIO, ceramic antenna

WiFi module based on ESP8266 chip. It operates in 802.11 b/g/n WiFi standard at 2.4 GHz. It is equipped with 14 outputs - 2 mm raster, 7 of which are GPIO and 1 ADC. It has a...
Index: MOD-03758
Index: MOD-03758
Unavailable
Regular price PLN16.18 Price PLN16.18

Aluminium Mounting Hub 6mm M3 - 2pcs. - Pololu 1999

Hub makes it easy to mount the wheel on the motor with the shaft of 6 mm using the M3 screws. The set has two pieces.
Index: PLL-01838
Index: PLL-01838
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN25.20 Price PLN25.20

DFRobot Mega 2560 v3.2 compatible with Arduino

DFRobot module fully compatible with Arduino Mega R3. It has 54 digital inputs/outputs, 15 PWM channels, 16 analog inputs and popular communication interfaces. Colored...
Index: DFR-02685
Index: DFR-02685
Available, 24h shipping!
(Check quantity)
Regular price PLN80.89 Price PLN80.89

Hexagonal Wheel Adapter - 12mm/6mm - 2pcs. - Pololu 2686

Aluminum adapter converting the 12 mm, hexagonal shaft suitable for different wheels, for 6 mm motor's shaft. The length of the adapter is equal to 20 mm.
Index: PLL-06092
Index: PLL-06092
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN12.93 Price PLN12.93

Products from the same category

Memory card SanDisk Ultra 653x microSD 16GB 98MB / s UHS-I class 10 with adapter

Popular memory card format micro SD/SDHC which is used in smartphones, tablets, cameras. Product class 10 with UHS-I interface from SanDisk company. Read speed: up to 98...
Index: BAL-09958
Index: BAL-09958
Unavailable
Regular price PLN27.63 Price PLN27.63

MakeBlock 70558 - M4 Screws Length: 16mm - 50pcs.

Screw with M4 thread, length 16 mm, works with allen screwdriver 2.5 mm. Made of stainless steel. Set includes 50 pieces.
Index: TRB-10345
Index: TRB-10345
Unavailable
Regular price PLN14.63 Price PLN14.63

MakeBlock 87300 - Set of Nylon Pulleys with bearings

Set of nylon pulleys with bearings, it can be used for designs that use fluid linear motion. Working with parts with a width of 8 mm, e.g. beam 0808. Each disk requires two...
Index: TRB-10373
Index: TRB-10373
Unavailable
Regular price PLN64.23 Price PLN64.23

MakeBlock 61216 - I1 plate - blue - 2pcs

Plate I1 is often used for the constructing linear motion mechanisms, due to its specially designed big hole.
Index: TRB-10460
Index: TRB-10460
Unavailable
Regular price PLN11.38 Price PLN11.38

MakeBlock 83011 - 62T Plastic Timing Pulley - without connector - 4pcs

62T timing pulley is made of plastic. It can be combined with other pulleys to drive various parts. Used as a car wheel. S et of 4 pieces.
Index: TRB-10493
Index: TRB-10493
Unavailable
Regular price PLN9.76 Price PLN9.76

MakeBlock 85407 - shaft D4x240mm - 1pc

D Shaft with a diameter of 4 mm and a length of 240 mm. Set includes 1 shaft.
Index: TRB-10542
Index: TRB-10542
Unavailable
Regular price PLN15.45 Price PLN15.45

3D Printer Creality CR-10 v2

3D printer designed by Creality . Allows you to print objects with maximum dimensions: 300 x 300 x 400 mm. It is an upgraded version of the CR10 model . It has a metal...
Index: CRL-15647
Index: CRL-15647
Unavailable
Regular price PLN1,625.20 Price PLN1,625.20

3Doodler Start - basic set - 48 cartridges

3Doodler Start printing pen for spatial drawing, specially designed for children. It magically turns drawing with pencils into 3D printis. Instead of flat drawings, it allows...
Index: SUN-10183
Index: SUN-10183
Unavailable
Regular price PLN194.31 Price PLN194.31

MakeBlock 72341 - Plastic Washers 4x8x1 - 100pcs.

Set of 100 pcs of plastic washers with the size of: 4 x 8 x 1 mm.
Index: TRB-10346
Index: TRB-10346
Unavailable
Regular price PLN4.88 Price PLN4.88

MakeBlock 61522 - U Bracket C - blue

Bracket in a shape of the letter U, works with a shaft 8 mm, bearing 8 mm and 16 mm.
Index: TRB-10381
Index: TRB-10381
Unavailable
Regular price PLN8.94 Price PLN8.94

MakeBlock 61230 - plate 0324-040 - blue - 2pcs

Plate 0324-040 length 40 mm, made of 6061 aluminium, 3 mm thick, has holes with a diameter of 4 mm and 8 mm.  Tiles can be combined with different beams for constructing...
Index: TRB-10462
Index: TRB-10462
Unavailable
Regular price PLN8.13 Price PLN8.13

MakeBlock 83014 - 90T Plastic Timing Pulley - 4pcs

90T timing pulley is made of plastic. It can be combined with other pulleys to drive various parts. Used as a car wheel, and is compatible with the pulley and TT motor in mBot....
Index: TRB-10494
Index: TRB-10494
Unavailable
Regular price PLN13.82 Price PLN13.82