- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Ready module that allows you tocontrol the belts and chains LED RGB + W viawi-finetwork using the app on your smartphone from anywhere in the world. BleBox LightBox v2 has an input to connect the physical switch to turn on/off the LED light. Is supplied with the voltagefrom 12 V to 24 V, it has 4 channels. In order to use BleBox, it is sufficient to configure the device via web browser. The device hasthreaded connectionfor mounting the wires, compact dimensions enable to close the module in the junction box.
The device has screw connections for installationof the wires, in the back are adhesive bars which facilitate the mounting of the module.
Wiring diagram
Before connecting, switch off the voltage in a powered circuit. A driver must be installed in a place protected from the external conditions, protected from access by third parties.
Wiring diagram
The module has seven leads-in in the form of screw connections to which you can connect the wires with a screwdriver. The device can be controlled by one bar LED RGB W or four LED monochrome bars. Sample configurations are shown below.
- IN - input to connect the switch.
- +supply voltage, combined with the LED bar.
- - the mass of the system.
- R- the red color channel (RED).
- G- green channel (GREEN).
- B- the blue color channel (BLUE).
- In- white channel (WHITE).
Setting
You need to connect to a wireless network device called "gateBox-xxxxxxxx" where "xxxxxxxx" is the serial number of the device,then use the storeAndroid Playorthe AppStoreyou need to download the applicationwBox - control everything. After the application starts, at the top of the screen will display your device, next to the name will be the " + " sign. To prestage devices, you must click the default name of the device.
Configuration can be done via the website - for this you need to connect to a wireless network of device, then just launch the Internet browser and enter the IP address of the device:http://192.168.4.1. A configuration page will appearwhere you must select your home wi-fi network and enter the password.
Specification
- Supply voltage: 12 to 24V
- Number of channels: 4
- Maximum current: up to 12 A (up to 3 a per each channel)
- Range: up to 50 m in open space
- Operating temperature: 0 to 40 °C
- Operation mode
- direct link (as Access Point)
- wi-fi connection through a standard router
- connection with access from anywhere via the Internet
- Control signal: 8-bit PWM
- Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
- The body is made from a polyurethane composition containing no halogen - self-extinguishing for the thermal protection class B (130 °C)
- Dimensions: 39 x 35 x 20 mm
Useful links |