|
Attention! The product has been discontinued. Check other products incategory. |
Product description: 3D printer - ATMAT Signal Pro 300
A 3D printerby the Polish company ATMAT, designed for printing 300 x300 x 300 mmelements.ATMAT Signal Prohas been closed in a sealedworking chamber with a carbon filter. The printer has a doubleextruder, enablingprinting in differentcolors or materials.Fullyautomatic calibration of the work tableallows to get a perfect first layer. It has a10.1"touchscreen with intuitivemenu, it can also act as a display of the image from the built-in camera. Additionally, it is equipped with WiFiforwireless communication andawide-anglecamera foronline printpreview.LED illumination ofthe working chamber provides excellent visibility of the printer in dark places.
|
The printer is available in different sizes! Signal Pro 300 ATMAT: 650 x 650 x 850 mm / 63 kg - printout: 300 x 300 x 300 x 300 mm ATMAT Signal Pro 500: 650 x 650 x 1050 mm / 69 kg - printout: 300 x 300 x 500 mm |
The use ofDIRECT typeextruder in ATMAT Signal allows to print from a wide range of filaments, such as: PLA,PET-G, ABS, TPU, PC, PA,ESDandsupport filaments: HIPS, PVA.
Dual extruder head in Signal Pro
Signal Pro has adouble extruderhead, whichallows you to print with filaments of differentcolors or twodifferent materials, includingsupport.The ability to use virtually any material available on the market provides unlimited production capacity.
Dual extruder in a Signal Pro ATMAT 3D printer.
Wireless communication
The built-inWiFi moduleallows wireless printing control from a computer or smartphone. It is possible to transfer files remotely, start the printing process and control printer parameters. Thanks to the mountedcamera with a wide-angle lens, it is possible to view the printout remotely.
Remote control of the printing process.
Active heating control
ATMAT Signal Pro device has asealed aluminum constructionwith heating control system. The printer allows tomaintain constant temperature inside the chamber, regardless of the conditions outside. The applied system of warm air flow control ensures proper working environment for demanding materials, preventing delamination and tearing of prints from the surface.
Active temperature control.
Table calibration
Automatic work table levellingsaves a lot of time and ensures correct printing. Before printing, the head calibrates its position in relation to the distance from the table, this action is repeated in several places on the table so that the distance is equal in each place.
Automaticwork table calibration.
Health and safety protection
The printer has been equipped with a number ofsafetyfeatures. Signal Pro is designed to work in office environments and production halls. The headindicatesreadiness to work and heat up to high temperature. All dangerous elements of the printer have beenspecially marked.The device also hasa safety button, which immediately stops the printer operation.
The safety button in ATMAT Signal Pro.
| Technical specifications | |
|---|---|
| Printing technology | FFF (FDM) |
| Work area | 300 x 300 x 300 mm |
| Case | Sturdy, closed, aluminium construction. Lockable door. Fialments placed inside the chamber |
| Printing environment | Closed working chamber with temperature control and carbon filter |
| Maximum chamber temperature | 45°C |
| Working platform | Automatic table calibration, heated |
| Working table material | Granite slab |
| Maximum working table temperature | 140°C |
| Nozzle diameter | 0.4 mm (basic) Applicability: 0.25 mm, 0.30 mm, 0.35 mm, 0.60 mm, 0.80 mm |
| Number of extruders | 2 |
| Extruder type | Direct |
| Maximum head temperature | 295°C |
| Layer height | 0.1 mm to 0.6 mm |
| Nominal print speed | 150 mm/s |
| Print speed in HQ mode | 80 mm/s |
| Maximum travel speed | 200 mm/s |
| X/Y axis positioning accuracy | 7 μm |
| Positioning accuracy of the Z axis | 1.25 μm |
| Software package | Cura |
| Software supported file formats | .stl, .obj |
| Supported materials | PLA, PET-G, ABS, TPU, PC, PA, ESD Supporting: HIPS, PVA |
| Diameter of material | 1.75 mm |
| Form of material | Reel |
| Supported spool masses |
2x 0.85 kg / 1 kg 1x 2.5 kg |
| Communication | WiFi, LAN (connection to router), USB stick |
| File format supported by the printer | .gcode |
| Control | 10.1" touch screen |
| Remote preview | Yes - camera with wide-angle lens |
| Working environment temperature | from 15°C to 25°C |
| Power supply | 230 V / 50 Hz |
| Maximum power | 1200 W |
| Average power consumption for printing with PLA | 250 W |
| Dimensions | 650 x 650 x 850 mm |
| Mass | 63 kg |
The set includes
- Signal Pro 300 ATMAT 3D printer
- Service kit
- Two reels of the pillar
- Technical documentation
Useful links |
