• EOL

Ambient Light Sensor - VEML7700 I2C Qwiic - SparkFun SPX-18981

Index: SPF-21123
The SparkFun module is equipped with the VEML7700 ambient light sensor from the SparkX series. The sensor has a 16-bit resolution, the measuring range is from 0 lx to approx. 167 klx with a resolution of 0.005 lx / count, it uses the I2C digital interface for communication. The sensor adopts the Filtron technology, the response time of which is close to that of the human eye. Thanks to O-Trim technology, ALS output tolerance below 10%. The board is equipped with two Qwiic connectors for simple connection via the I2C interface, additionally 4-pins for soldering the goldpin strip were provided.
Ambient Light Sensor - VEML7700 I2C Qwiic - SparkFun SPX-18981
€10.90
€8.86 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Product description: Digital Ambient Light Sensor - VEML7700 - I2C Qwiic - SparkFun SPX-18981

The SparkFun module is equipped with the VEML7700 ambient light sensor from the SparkX series. The sensor has a 16-bit resolution, the measuring range is from 0 lx to approx. 167 klx with a resolution of 0.005 lx / count, it uses the I2C digital interface for communication. The sensor adopts the Filtron technology, the response time of which is close to that of the human eye. Thanks to O-Trim technology, ALS output tolerance below 10%. The board is equipped with two Qwiic connectors for simple connection via the I2C interface, additionally 4-pins for soldering the goldpin strip were provided.

SPX-18981 is an experimental product and is part of SparkX's prototype product line from SparkFun . Modules in this series are advanced solutions that are not used in regular production. They are produced in very small amounts. They are tested by SparkFun, but have no technical support and are not covered by the warranty.

Digital ambient sensor VEML7700

Digital ambient sensor VEML7700.

The pins of the module The pins of the module.

Description of the module pins

The module with the VEML7700 sensor for communication uses the I2C interface, it is equipped with two Qwiic connectors and holes for soldering the Goldpin connector.

  • GND - the ground of the system
  • 3V3 - supply voltage 3.3 V
  • SDA - data line of the I2C interface
  • SCL - clock line of the I2C interface

What is Qwiic?

Qwiic SparkFun is an ecosystem of modules with dedicated connectors based on the I2C bus . The main assumption of this solution is to improve the prototyping process. All elements of this ecosystem use a common 4-pin JST connector with a spacing of 1 mm . This reduces the amount of space required on the PCB. It also protects against connection inconsistent with the polarity.

Specification of the module with the ambient light sensor

  • Sensor: VEML7700
  • Adaptation of Filtron technology: response time close to that of the human eye
  • Arrival of O-Trim technology: ALS output tolerance ≤ 10%
  • 16-bit dynamic range of ambient light detection from 0 lx to approx. 167 fps with a resolution of up to 0.005 lx / count
  • Flicker suppression 100 Hz and 120 Hz
  • Perfect temperature compensation
  • High resolution dynamic detection
  • System shutdown control
  • Supply voltage: 3.3 V
  • Typical current consumption:
    • sleep mode: 0.5 µA
    • refresh time 4100 ms: 2 µA
    • refresh time 100 ms: 45 µA
  • I2C address: 0x10
  • Dimensions: 6.8 x 3.0 x 2.5 mm
SparkFun SparkX Digital Ambient Light Sensor - VEML7700 - I2C Qwiic - SparkFun SPX-18981.

Package width 10 cm
Package height 0.4 cm
Package depth 6.5 cm
Package weight 0.004 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: