- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: SparkFun Qwiic Thermocouple Amplifier - thermocouple amplifier - MCP9600 - with PCC connector - SparkFun SEN-16294
Module with a thermocouple amplifier equipped with the MCP9600 system. It works with K-type thermocouples via the PCC connector. It uses the I2C communication interface via the Qwiic connector. It enables temperature measurement in the range from -200 ° C to 1350 ° C , with an accuracy of 1.5 ° C. The module has the ability to read both the ambient temperature and the directly tested element. Additionally, the user can configure up to four temperature thresholds which, when exceeded, trigger an alarm.
Kit contents
- SparkFun Qwiic Thermocouple Amplifier - thermocouple amplifier - MCP9600 - with PCC connector - SparkFun SEN-16294 - 1 piece
The product is compatible with Arduino
The manufacturer provides a detailed user guide for connecting the module. There you will also find information that will allow you to program the amplifier appropriately.
SparkFun Qwiic Thermocouple Amplifier - K thermocouple amplifier.
Technical specification of the module
- Module type: thermocouple amplifier
- Built-in chip: MCP9600
- Works with type K thermocouples
- Temperature range from -200 ° C to 1350 ° C
- Measurement resolution: 0.0625 ° C
- Measurement accuracy: 1.5 ° C
- Connectors:
- 1x PCC for K type thermocouple
- 2x Qwiic connector to connect to the main module
- Communication interface: I2C bus
- Interface address:
- 0x60 (default)
- ADDR jumper to change the I2C address
Connection of a thermocouple amplifier
The MCP9600 thermocouple amplifier module communicates via the I2C interface. It is equipped with a PCC connector for connecting a K-type thermocouple and two alternative connection options with the main module (e.g. with Arduino) - Qwiic and solder pads.
- GND - the ground of the system
- 3V3 - power pin
- SDA - data line of the I2C bus
- SCL - clock line of the I2C bus
- ALT1 - ALT4 - alert pins
Pinout description.
