• EOL

Display 4-chip 0.56'' - 7-segment Backpack - I2C - green - STEMMA QT / Qwiic - Adafruit 5603

Index: ADA-22203
Adafruit module with a 0.56'' 7-segment display. It enables the display of 4 digits with dots after each digit and one colon between digits 2 and 3. The digits of the module are highlighted in green . The whole thing is controlled via the I2C interface, so there is no need to connect a large number of wires. The module is additionally equipped with two quick connect connectors - Qwiic / Stemma QT .
Display 4-chip 0.56'' - 7-segment Backpack - I2C - green - STEMMA QT / Qwiic - Adafruit 5603
€23.90
€19.43 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Product description: 0.56'' 4-digit display - 7-segment Backpack - I2C - green - STEMMA QT / Qwiic - Adafruit 5603

Adafruit module with a 0.56'' 7-segment display. It enables the display of 4 digits with dots after each digit and one colon between digits 2 and 3. The digits of the module are highlighted in green . The whole thing is controlled via the I2C interface, so there is no need to connect a large number of wires. The module is additionally equipped with two quick connect connectors - Qwiic / Stemma QT . On the board you can also find jumpers to select the I2C address, so you can connect up to eight 7-segment display modules. Module powered by 5 V or 3 V.

The subject of the sale is the display in the assembled version.

4-digit 0.56'' display - 7-segment Backpack - I2C - green - STEMMA QT/Qwiic - Adafruit 5603.

0.56'' 4-digit display - 7-segment Backpack - I2C - green - STEMMA QT / Qwiic - Adafruit 5603.

4-digit 7-segment display module.

Pins of the 7-segment display

The communication module uses the I2C interface, and the board also includes 2 Qwiic / STEMMA QT connectors for quick connection to modules with the same connector.

  • VCC - supply voltage 5 V / 3 V
  • GND - system ground
  • SDA - data line of the I2C interface
  • SCL - clock line of the I2C interface

More information on how to connect can be found here .

Technical specification of the display module

  • Type: segment display
  • Number of segments: 7
  • Control system: HT16K33
  • Number of digits: 4
  • Number of dots: one after each number and one colon between the number 2 and 3
  • Backlight color: green
  • Interface: I2C
  • I2C address: configured with jumpers from 0x70 to 0x77
  • Leads: solder pads / Qwiic connectors / STEMMA QT
  • Module dimensions: 50.0 x 26.7 x 6.0 mm (without display)
  • Display dimensions: 19 x 50 x 14 mm
  • Weight: 14g
The diagonal is 0.56''.

The diagonal is 0.56''.

Kit contents.

Kit contents.

Kit contents

  • 0.56'' 4-digit display - 7-segment Backpack - I2C - green - STEMMA QT / Qwiic - 1 piece
  • Golpin strip 1x6 pin - raster 2.54 mm - 1 piece

Also check the manufacturer 's user guide !

Screen - type sectional LED
Screen - diagonal 0.56 "
Screen - interface I2C
Screen - touch no
Screen - resolution 4 cyfry
Package width 10.5 cm
Package height 5 cm
Package depth 2 cm
Package weight 0.017 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: