- EOL
| Attention! Production of the Genuino 101 tile has been completed. We encourage you to familiarize yourself with the offer ofother modules from Arduino series. |
Description
Arduino compatible module equipped with 32-bitIntel Curie microcontrollerwith x86 Quark architecture and ARC 32-bit 32 MHz. It has 196 kB of flash memory, 24 kB SRAM, 14 digital inputs/outputs of which 4 can be used as PWM channels, 6 analog inputs and popular communication interfaces. The outputs work with a voltage of 3.3 V but tolerate 5 V. The board also has a Bluetooth LE module and an accelerometer and gyroscope.
Review of the board on theElektro Guidechannel.
| See a sample project and review onForbot.pl. |
Main features
Below are some of the features that distinguish Genuino modules from other programmable tiles.
| The name | Description |
|---|---|
|
Installed bootloader |
Thanks to the installed bootloader, the appropriateUSB cable andsoftware from the manufactureris sufficient to program the device. |
|
Arduino Shield |
The layout of connectors enables installation of dedicatedArduino Shieldcovers. |
| Built-in modules | On the plate are: 6-axis accelerometer and gyroscope and Low Energy Bluetooth. |
| Microcontroller | The board has a 32-bitIntel Curiechipwith ARC x86 (Quark) architecture, clocked at 32 MHz. It has 196 kB of flash memory and 24 kB SRAM. |
|
Quotes . digital |
14 digital inputs/outputs enable, among other things, to control LEDs, relays and read button statuses.Although the outputs work with 3.3 V, they also tolerate 5 V. |
|
Capacity Current |
The maximum current capacity of a single output is 20 mA. |
|
Outputs PWM |
4 PWM outputs allow e.g. for motor control and diode brightness adjustment. |
|
Inputs analogue |
6 inputs of the built-in 10-bit analogue-to-digital converter support, among others, sensors with analogue output. |
|
Communication serial |
The device supports popular communication interfaces, among others: UART, I2C (TWI) and SPI. |
| Special functions | Some pins have special functions, a brief description of which is available on the manufacturer's website. |
|
Memory Embedded |
The Intel Curie chip is clocked with a 32 MHz signal, has 196 kB of flash memory and 24 kB of SRAM. |
|
Power supply DC connector |
Any power supplyfrom 7 V to 12 V with a 5.5 x 2.1 mm DC connector can be used to power Genuino. |
|
Power supply USB port |
The board can be powered from a computer viaa USB cable witha maximum current capacity of 500 mA. Arduino has a system that protects the socket against short circuit and too high current flow. |
|
Connector . ICSP |
The module has ICSP outputs to connect an externalAVR programmer. |
|
Pin IOREF |
The IOREF pin allows for direct access to the voltage with which the I/O outputs work. |
|
Built-in LED |
The connected LED on pin 13 allows debugging of simple programs. |
|
Output 3,3 V |
The built-in voltage regulator enables external devices to be supplied with 3.3 V with current consumption of up to 1500 mA. |
|
The layout of the elements on the Genuino 101 board.
Specification
- Supply voltage: 7 V to 12 V
- Microcontroller: Intel Curie x86 (Quark)
- Maximum clock frequency: 32 MHz
- SRAM: 26 kB
- Flash memory: 196 kB
- Ports I/O: 14
- PWM outputs: 4
- Number of analog inputs: 6 (A/C converter channels with 10 bits resolution)
- Serial interfaces: UART, SPI, I2C
- Connected LED on pin 13
- USB A socket for programming
- 5.5 x 2.1 mm DC connector for power supply
Starting set from Genoa 101
Our offer also includes a set of electroniccomponentsto facilitate the start of programming and interaction with the equipment using the Genuino 101 board, including: LEDs, resistors, sensors, ICs, motors and LCD display and base plate Genuino 101 - equipped with 32-bit Intel Curie microcontroller.
Check theSparkFun Inventor's Kit for Genuino 101 + motherboard.
Useful links |
