- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
The module has small size and great potential. It is equipped with a32-bitmicrocontroller with the coreARM Cortex M0+ 48 MHz, 62 KB of Flash, 8 KB of RAM. It has27 pins of I/o,10 of which are PWM channelsand13 are analog inputs, theDMAcontroller and popular communication interfaces:SPI, I2C, I2S. Pins operates with a voltage of 3.3 V, they do not tolerate a value of 5 V.
Inputs/outputs
The system has 27 pins of I/O. Between them are 13 analog inputs of high-resolution, 10 PWM outputs, 7 timers, 3 UART interfaces, SPI, I2C, I2S interface, 4 DMA channels and inputs of touch sensor.
The distribution of pins of Teensy LC module, a detailed description can be found onthe website of the manufacturer.
Programming
The module has uploaded bootloader so it can be programmed using the built-in microUSB connector, without the need to use an external programmer. For this purpose, you can use any environment of C language or, after downloading the extension ofteensyduino, through the Arduino IDE.
Specification
- Supply voltage: 3.7 V to 5.5 V
- Microcontroller: MKL26Z64VFT4 (documentation)
- Core: ARM Cortex M0+ 48 MHz
- Flash memory: 62 KB
- RAM memory: 8 KB
- EEPROM: 1/8 KB
- 13 analog inputs with high resolution
- 27 digital input/output (5 Volt tolerance on digital inputs)
- 10 PWM outputs
- 7 timers for intervals and delays, separate from PWM
- 3 UART interfaces
- SPI, I2C, I2S interfaces
- I2S for high quality audio interface
- 4 DMA channels (separate from USB)
- Inputs of touch sensor
- Dimensions: 35 x 18 mm
Useful links |