• EOL

Complete StarterKit with NanoPi NEO2 512MB

Index: NNP-09478

Set includes minicomputer Nano Pi-Neo2, radiator, NanoHat OLED shield and aluminum case. In addition, the kit includes a microUSB power cable, memory card and necessary mounting components.

Complete StarterKit with NanoPi NEO2 512MB
€59.90
€48.70 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: FriendlyARM

Attention!

The product has been discontinued. Check others products incategory.

Description

Set includes minicomputerNano Pi Neo 2 512MBand the radiator and converter USB-UART. In addition, the kit includes a microUSB power cable, memory card and necessary mounting components.

 

L. p.PhotoName
1 NanoPi NEO 2 512 MB- miniature computer NanoPi in version Neo 2 with the H5 CPU Allwinner quad-core ARM Cortex-A53 with a clock frequency of 1 GHz. Board has 512 MB DDR3 of RAM, built-in Gigabit Ethernet port and a USB slot + 2 x USB Host on pins of 2.54 mm, 36 GPIOs, connector for microSD cards. It works with systems from the manufacturer -u-boot and UbuntuCore.
2

Radiator with thermoconductive tape to NanoPi NEO- radiator with thermocnductive tape and mounting screws, dedicated for minicomputer NanoPi Neo.

3 Aluminium case - silver case with brown buttons with the size of 44 x 47 x 33 mm.
4 The microUSB-USB cable- allows you to power minicomputer.Power supply unit with USB slot must be purchased separately.
5

MicroSD memory card, class 10 with the capacity of 8 GB with installed Linux Ubuntu 16.04 .
6

NanoHat OLED - shield for Nano Pi with OLED display of 0,96" and a resolution of 128 x 64.
6

The printed instruction is helpful when you first start the device.

 

NanoPi Neo 2

Miniature computerNanoPiin versionNeo 2withprocessorAllwinner H5 quad-coreARM Cortex-A53 with a clock frequency of 1 GHz. Board has512 MBof memoryRAM DDR3, built-in portEthernet 10/100/1000 Mbit / sandUSB connector + 2x USB Host on pinach2.54 mm,36 GPIO, connector for microSD cards. It works with systems of the manufacturer - u-boot and UbuntuCore.

 


The advantage of the board is its small size, the outline of the board is 40 x 40 mm.

The power supply of the device

Unfortunately, the manufacturer did not add the power supply to the kit. NanoPi Neo 2 requires 5 V power supplied via microUSB slot. In our store, available are power supplies with the suitable microUSB plug.

The device has a USB slot connector, an Ethernet port and many others.

 

Operating system

NanoPi works with the systems selected by the manufacturer: u-boot and UbuntuCore. The drive of the device may be a microSD card which can be purchased in our store.

 

Operating systems can be downloaded fromthe manufacturer's website.

The manufacturer also providesguide for the installation of the system.

Specification

Model NanoPi Neo 2
Specification
Processor Allwinner H5
The core

Quad-Core ARM Cortex A53

Systems

u-boot

UbuntuCore

Clock frequency 1 GHz
RAM

512 MB

Memory

microSD card

GPIO slot

36-pin connector

for self-soldering

Power

5 V / 2 A - microUSB

Board sizes 40 x 40 mm
Interfaces
USB-Host

1 x USB A socket

2 x USB Host on pins of 2.54 mm

Network interface Ethernet 10/100/1000 Mbps 
Video -
Audio

audio output and microphone

out on the GPIO connector

Communication

UART, SPI, I2C, GPIO, PWM

The debugger

Serial port of 4pin / 2.54 mm

Additional

Built-in LED

 

UC - Microcontroller Allwinner H3
UC - Core Cortex A7
UC - RAM 512 MB
UC - freq 1.0 GHz
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: