Communication - Strona 3
RFID identification card S102N - 125kHz - compatible with EM4100 - 25pcs
The RFID identifier in the form of a thick, durable card with a hole. The card works with a frequency of 125 kHz . It has 64 bits of ROM memory. The device works at a small...L76X Multi-GNSS HAT - GPS/BDS/QZSS for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 16193
The GNSS overlay for Raspberry Pi and Jetson Nano minicomputers supports Multi-GNSS systems: GPS, BDS and QZSS. The main advantages of the module are fast positioning, high...Antenna Square GPS 2.4V - 5V SMA - 3m
GPS antenna at 1575.42MHz ± 1.02 MHz. Standard cable length is 3 meters. The antenna has a magnetic base so we can place it on a metal surface, e.g. on a car roof. It is...Antenna Mini Mag GSM / UMTS 6dbi SMA GL - 3m
Antenna with magnetic base with gain of up to 6 dBi, for mounting on steel surfaces. The antenna operates on frequencies from 890 to 960 MHz, from 1710 to 2150 MHz, from 2600...Antenna Mini Mag GSM / UMTS SMA - 3m
Small antenna with a magnetic base, designed for modems, cash registers, gsm gates, banks, etc. The GSM antenna operates on frequencies from 890 to 960 MHz, from 1710 to 2150...- Reduced price
- SPECIAL OFFERS
Mini Flex GSM antenna - SMA connector - 2.5m
Slim, flat GSM antenna operating on frequencies from 890 to 960 MHz, from 1710 to 2150 MHz. Equipped with SMA connector, mounted with adhesive tape.Magnetic antenna LTE Diablo 9dBi SMA
Dual omnidirectional antenna designed for modems with two antenna connectors. The antenna works with frequencies from 800 to 960 MHz, from 1710 to 2170 MHz, from 2500 to 2700...GPS SAM-M8Q module - Qwiic - antenna PCB - SparkFun GPS-15210
SAM-M8Q is a highly accurate, miniature board with 72-channel GNSS receiver that can receive signals from GPS, GLONASS, BeiDou and Galileo. It communicates using SPI / I2C or...iNode Control Point USB - programmable USB module - RFID system
iNode Control ID works the same as iNode Control Point. All information on the verification of the remote devices is transmitted via USB to the computer. It communicates via...- Sale
WiFi antenna 3dB SMA male - self-adhesive
This 3 dB WiFi antenna with SMA male connector, operates at 2.4 GHz. The energetic gain is 3 dB. It has a layer of adhesive tape. Dimensions: 116 x 22 mm . The cable...RFiD keychain - 125kHz - 10szt.
The RFID identifier in the form of a keychain. Each chip has a unique code. The device works at a distance of 2 - 5 cm from the reader , the carrier frequency is 125 kHz....Wireless IR remote control - PC Remote Controller
Wireless remote control is a combination of mouse and some keyboard buttons. Controller dedicated for remote control of intelligent multimedia center such as smart TV or...Huzzah ESP8266 - WiFi module GPIO, ADC, PCB antena - Adafruit 2471
Wi-fi module, based on ESP8266 system. On board are 9 GPIO ports with the support for iSPI I2C, analog input and UART interface. It has NodeMCU software installed which enables...- Sale
- SPECIAL OFFERS
GPS module UBX-G7020-KIT + case - DFrobot
GPS UBX-G7020-KT module has a 56-channel GPS receiver, it operates with a voltage from 3.3 V to 5 V. The update frequency is from 1 Hz to 10 Hz. Communication is via the serial...Bluetooth Low Energy module (BLE 4.0) - NRF51822 - Waveshare 9515
The communication module working in the Bluetooth BLE 4.0 standard at a distance of up to 30 meters. Unlike classic BT, BLE has no legal restrictions, iOS apps can be freely...GPS USB/TTL module for Raspberry
GPS module based on the L80-R-39 system. It supports 66 search channels and 22 tracking channels. It is working with the voltage of 3.3 V - 5 V. The module has the USB and the...Grove - 125kHz RFID reader with antenna - Seeedstudio 113020002
Easy to use module of RFID reader with UART and Wiegand interface. Works with UEM4100 RFID modules. The kit includes antenna which allows you to communicate in a range up to 7...13.56MHz NFC antenna with U.FL connection
The NFC antenna operating in the band of 13.56 MHz and equipped with a u.FL connector. It works, i.a. with modules of NFC Shield V2 Grove Xadow NFC and NFC.Adapter for the ESP-12E ESP8266 WiFi module
The adapter facilitates the installation of the ESP-12 module on the breadboard. This set includes the goldpin connectors, 2.54 mm pitch for self-soldering.Bluefruit LE UART Friend - Bluetooth Low Energy (BLE 4.0) - Adafruit 2479
The board with a Bluetooth Low Energy module and the remote communication interface UART.RC Switch with digital output - Pololu 2801
The module processes the RC signals to a digital on/off status. The board is working with a supply voltage of 2.5 V-5.5 V, maximum output current is 25 mA.Beetle Bluno - a Bluetooth 4.0 low energy controller ATmega328
A small board with known from the Arduino Uno ATmega328 microcontroller and CC2540 system which supports Bluetooth 4.0 HID. The device can be programmed wirelessly or via...See also
- Computer accessories
- Automobile accessories
- Cooling
- Diodes
- Sound and acoustics
- Mounting components
- Passive elements
- Wearables (e-textiles, smart clothes)
- Cameras
- Memory cards & disks
- Converters
- Electronics courses
- Microcontrollers
- Animal repellers
- LED lighting
- Programmers
- Relays
- Voltage regulators
- Artificial intelligence
- Motor drivers and servos
- Integrated circuits
- Displays and screens
- Consoles
