- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Pololu Simple High-Power 24v12 - single-channel USB 40V / 12A motor driver
- Dimensions: 23 x 17 x 5 mm
- Cable length:
- Motor cables: 55 mm
- Wires for package: 75 mm
- Cable to receiver: 95 mm
- Weight (with wires): 8 g
- Operational current: continuous 10A / 10 min
- Max. operational current (peak): 15A
- Plug for receiver: JR type
- Number of cells: 2 - 3 LiPo
- Operating voltage: 7.4 - 11.1V
- Built-in functions: brake programming, timing
|
The manufacturer provides a detaileduser guide. The kit requires simple soldering of basic electronic components. In our offer you will also find anassembled system. |
Main features of the Pololu Simple engine controller
- Easy-to-use bidirectional DC motor controller
- Power supply: 5.5 V to 30 V (18v7, 18v15, 18v25 versions) and up to 40 V (24v12, 24v23)
- From 7A to 25A continuous current depending on the version
- Four communication protocols:
- USB - direct connection to a computer
- TTL - serial interface for connection with e.g. a microcontroller
- Radio signal (RC)
- Analog input (0 - 3.3 V) - connection of a potentiometer or joysticks
- Simple configuration via USB (Windows 7, Vista, XP, Linux)
- Detailed information is available in theinstruction manual
Specification of the Pololu simple motor controller
- Supply voltage of motors: 5.5 V - 40 V
- Continuous current: up to 12 A.
- The maximum frequency of the PWM signal: 21.77 kHz
- Supply voltage of the logic part: up to 3.3 V
- Digital inputs are 5V tolerant
- Number of channels: 1
- Dimensions: 53.3 x 27.9 x 12.7 mm
- Weight: 14 g
Detailed information is available in theinstruction manual.
| For systems using 24 V supply voltage, we recommend the use of a24v12or24v23 driver. When using18v17,18v15and18v25controllers, there is a risk that the voltage will exceed the permissible value of 24 V at certain moments (e.g. when the batteries are fully charged), which may cause permanent damage to the system. |
Additives
- Manualcontaining sample connections and source codes
- Adjustable start and maximum speed
- Option to prevent accidental starting of the engine
- Adjustable PWM frequency from 1 kHz to 22 kHz
- Can be turned off when the supply voltage is too low
- LED diode indicating the appearance of errors
Communication
HighPower series controllers can communicate through three interfaces:
Computer USB port
- Communication with a computer through a virtual COM port
- Sample codesin C #, Visual Basic, .NET, C ++
- Optional security (CRC control, timeout)
- Automatic detection of the baud rate (from 1200 bps to 500 kbps)
Remote Control - modeling apparatus
- Frequencies from 10 to 333 Hz
- Adjustable parameters for RC signal
- Two channels
- Possibility to power the receiver from the BEC system (BEC jumper)
Analog interface
- Resolution: 12 bits
- Voltage range: 0 to 3.3V
- Two analog channels
List of regulators
 18v7 |
 18v15 |
 24v12 |
 18v25 |
 24v23 |
|
| Voltage: | 30 V | 30 V | 40 V | 30 V | 40 V |
| Recommended voltage: | 24 V | 24 V | 34 V | 24 V | 34 V |
| Continuous current: | 7 A. | 15 A. | 12 A. | 25 A. | 23 A. |
| Width: | 28 mm | 28 mm | 28 mm | 31 mm | 31 mm |
| Length: | 53 mm | 53 mm | 53 mm | 58 mm | 58 mm |
| Weight*: | 7 g | 7 g | 7 g | 12 g | 12 g |
* - Weight without connectors.
Useful links |
