- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Pico 4G expansion board - for Raspberry Pi Pico - SB Components 22748
Pico 4G is an expansion board for SB Components compatible with Raspbery, thanks to which it is possible to expand the Raspberry Pi Pico board with the Quectel EG25-G and LTE module of category 4 with built-in WiFi support, multi-constellation GNSS and USB 2.0. The module supports a maximum link speed of 150 Mb / s and uplink speed of 50 Mb / s . The advantage of the Pico 4G module is backward compatibility with radio networks, thanks to which it is possible to operate 2G networks in places where modern 4G and 3G networks do not reach. The board is equipped with a 1.14-inch display with a resolution of 240 x 135 px, the screen is able to display 65 thousand. RGB colors , its advantage is undoubtedly a vivid display effect. The device has been designed for SPI connection using the built-in GPIO socket.
Pico 4G - set.
Features of Pico 4G
- Has a built-in 1.14 "display
- Uses very little power
- The maximum speed of the downlink is 150 Mb / s
- The maximum uplink speed is 50 Mb / s
- Supports backward compatibility of radio networks
Set contains
- 1x Pico 4G expansion board
- 1x 4G antenna
- 1x GPS antenna
- 1x SMA / UFL connector
The Raspberry Pi Pico is not included in this kit, please purchase it separately in our store
product specification
- Module: Quectel EG25-G
- Compatible with: Raspberry Pi Pico
- Communication interface:
- USB 2.0
- UART
- Transmission:
- LTE
- UMTS / HSPA
- GSM / GPRS / EDGE
- Power supply: 5V via USB
- Mounting hole diameter: 3 mm
- Dimensions: 130 x 75 mm
Pico 4G expansion board.
Useful links |
