- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Arduino Uno Rev3 educational package
A set of ten popular, original Arduino Uno modules with AVR ATmega328 microcontroller. It has 32 kB of Flash memory, 2 kB of RAM, 14 digital I/Os of which 6 can be used as PWM channels, 6 analog inputs and popular communication interfaces.
Arduino Uno product specification
- Supply voltage: 7 V to 12 V
- Microcontroller: ATmega328
- Maximum clock frequency: 16 MHz
- SRAM memory: 2 kB
- Flash memory: 32 kB (5 kB reserved for bootloader)
- EEPROM: 1 kB
- I/O ports: 14
- PWM outputs: 6
- Number of analog inputs: 6 (A/D converter channels with 10 bit resolution)
- Serial interfaces: UART, SPI, I2C
- External interrupts
- Connected LED on pin 13
- USB A socket for programming
- DC 5.5 x 2.1 mm connector for power supply
- Transparent adhesive feet included
Arduino Uno Rev3.
|
The product includes set of 10 original Arduino Uno modules at special promotional price. |
Main features of Arduino Uno module
Here are some features that distinguish Arduino modules from other programmable boards.
| Name | Description |
|---|---|
| Installed bootloader | Thanks to installed bootloader, all you need to program your device is proper USB cable and software from manufacturer website. |
| Arduino Shield |
The layout of connectors allows to mount dedicated Arduino Shield overlays. |
| Pinouts digital | 14 digital inputs/outputs allow to control LEDs, relays and to read button states. |
| Performance current capacity | The maximum current capacity of a single output is 40 mA. |
| Outputs PWM | 6 PWM outputs allow, for example, to control motors and regulate the brightness of diodes. |
| Inputs analog | 6 inputs of built-in analog-to-digital converter with 10-bit resolution supports e.g. sensors with analog output. |
| Communication serial | The device supports popular communication interfaces, including: UART, I2C and SPI. |
| Special functions | Some pins have special functions, a brief description of which is available in our guide. |
| Memory built-in |
The Atmega328 is clocked at 16 MHz, has 32 kB of Flash program memory, 1 kB of EEPROM and 2 kB of SRAM. |
| Power supply DC connector | To power Arduino you can use any power supply with voltage from 7 V to 12 V with DC 5,5 x 2,1 mm connector. |
| Power supply USB port | You can power your board from computer via USB cable, remembering that USB port has maximum current capacity of 500 mA. Arduino has a system to protect the socket against short circuit and excessive current flow. |
| Connector ICSP | Module has ICSP connector for connecting external AVR programmer. |
| Pin IOREF | IOREF pin gives direct access to I/O voltage. |
| Built-in LED | Connected LED on pin 13 enables debugging of simple programs. |
| Output 3,3 V |
Built-in voltage regulator allows to supply external devices with 3.3 V with up to 50 mA current consumption. |
| Microcontroller in THT | Thanks to THT casing, if Atmega328P main mic rocontroller is damaged, it can be easily replaced. |
Arduino Uno Rev3 - A000066 - pack of 10 pcs.
We're offering you a bargain offer of 10 identical boards Arduino Uno Rev3. Devices are perfect for students or pupils, but will be also useful for professional projects.
Each board has 14 input/output ports, 6 of which can be used to send PWM signals (for example, to control LED light brightness) and 6 analog channels (for example, to receive signals from analog sensors) with 10-bit resolution.
10 original Arduino Uno Rev3 boards
It's worth remembering to provide adequate power supply for your Arduino Uno before working on it. The device can be powered via special DC 5.5mm x 2.1mm socket, where 7V to 12V current should be provided. Alternatively, the device can be powered via USB port (but then the current capacity will not be higher than 0.5 A).
In our offer you will also find other equally attractive offers - we propose, among others, Arduino Nano, Arduino Mega, Arduino Leonardo boards and, most of all, very many caps and devices, which are compatible with various Arduino models.
Useful links |
