• EOL

Cleaning station DSS Station - Zortrax

Index: DKT-15087 EAN: 5902280820642

The device for flushing out support structuresmade of Z-SUPPORT material. The device does not require any additional solvents. It is very easy and safe to use as well as ecological.

Cleaning station DSS Station - Zortrax
€694.50
€564.63 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Zortrax

Attention!

The product has been discontinued. Check other products in category.

Description: Zortrax DSS Station

Zortrax DSS is an automatic device for removing soluble support structures printed from PVA or BVOH watersolublefilaments.The device has a display showing the remaining time and temperature, function buttons for temperature control, power button, top cover, rotor, rinsing basket, handles, electrical socket with switch and a valve for water drainage.

The DSS system, reduces the need for manual removal of support, allows3D printers to offergreat convenience. The DSS is a fluid flow station that is designed to dissolve the media. You can leave the printed item in the water for a few hours and it will remain without any residue. This process is completely hands-free, so you can save your time.

The station itself is very easy to use, just fill the device with water and insert the element into it. After a few hours you have to pull out the element (sometimes you will have to use a brush to remove the rest of the support material). Finally, dry carefully and ready.

Zortrax DSS Station

Which support material can be removed?

DSS Zortrax removes support material made ofPVA or BVOHfilaments regardless of manufacturer. Everything happens in a chamber with water without any additional solvents, so you can work safely with the device. There is also no need to interfere in its operation, the support material dissolves itself.

PVA(Polyvinyl Acetate) isa water-soluble support material designed for 3D printers. It has a low melting point.

BVOH (Butenediolvinyl alcohol co-polymer) is a fully water-soluble support pillar designed for 3D printers for complex models. It combines very well with ABS and PLA.

Zortrax DSS Station specifications

Technical Specification
Working volume 6 L
Maximum operating temperature 75°C
Maximum speed 220 rpm
AC input 110 V ~ 9 A 50/60 Hz
240 V ~ 4.2 A 50/60 Hz
Maximum energy consumption 1000 W
Storage temperature of the device from 0°C to 35°C
External dimensions 235 x 238 x 295 mm
Internal dimensions

188 x 188 x 199 mm

Dimensions 250 x 150 x 230 mm

Net weight

8.4 kg

Included:

  • Rubber gloves
  • Toothbrush
  • Drainage pipe
  • Power Cable
  • Quick start guide
  • Basket for rinsing

Package width 33 cm
Package height 37.5 cm
Package depth 33.5 cm
Package weight 6.7 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: