- EOL
Attention! The sale of the product has been completed. Check others in thiscategory. |
Product description: Wio Lite W600 - ATSAMD21 - with connectors
Wio Lite W600 module equipped with AtmelSAMD21 Cortex-M0+andW600 ARM Cortex-M3 moduleresponsiblefor 2.4 GHz Wifi wireless communication. The module is powered by a5-voltUSB-Csocket or by a 3.7-voltLi-Pol batteryvia the built-in JST connector. PI PI PIs on the board work with3.3 Vlogical voltage of which 6 pins are analogue and 14 are digital.
Wio Lite W600 - ATSAMD21 - with connectors
The Wio Lite W600 is equipped with 14 digital I/O pins and 6 analogue inputs operating at 3.3 V with a maximum current of up to 40 mA per pin. The module is powered via USB-C socket with 5 V or via Li-Pol battery via JST connector. Additionally, there is a CN3065 chip on the board which is responsible for charging the battery without disconnecting it from the module.
The Wio Lite W600 board is connected.
There are 3 LEDs on the board:
- User LED - a diode without an assigned function, it can be controlled by software.
- Charging indicator - LED indicating charging of the connected Li-Pol battery.
- Reset LED - LED lights up when the reset button on the board is pressed.
Programming the Wio Lite module W600
The Wio Lite W600 module is based on the Atmel SAMD21Cortex-M0+chip, similarly to Arduino MKR Zero, soin theory it shouldbe fully compatible with it. Programming of the board is done using Arduino IDE environment. The manufacturer has prepared ready-made W600 library with sample codes.
Wio Lite W600 module.
Product compatible with Arduino. The manufacturer has prepared auser guidethat describes programming of the board using Arduino IDE. |
The set includes
- Wio Lite module W600
- Goldpin connectors
WioLitespecificationW600 - ATSAMD21 - with connectors
- Power supply:
- USB C - 5 V
- Li-Pol battery - 3.7 V
- Pin capacity 3.3 V and 5 V: 600 mA
- SAMD21Atmel System
- The core: Cortex-M0+
- Maximum clock frequency: 48 MHz
- SRAM: 32 kB
- Flash memory: 256 kB
- I/O ports: 20
- Number of analog inputs: 6 (A/C converter channels with resolution up to 12 bits)
- Serial interfaces: UART, ICSP, I2C
- W600 - Wifi chip
- Core: Cortex-M3
- SRAM: 288 kB
- Flash memory: 1 MB
- Wifi standard: IEEE802.11b/g/n
- Frequency: 2.4 GHz
- Network type: STA /AP / AP+STA / Wi-Fi Direct
- Network protocol: TCP / UDP /ARP / ICMP / DHCP / DNS / HTTP
- Encryption standards: WEP /WPA-PSK / WPA2-PSK
- Encryption: WEP64/ WEP128 / TKIP / CCMP(AES)
- USB-C socket
- JST raster socket 2,00 mm
- Plate dimensions: 50 x 22 mm
Useful links |