- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Push solenoid 12 V 0,6 kg 13 mm
The pushelectromagnetis powered by12 V, can push a mass of0.6 kgwith a standard earth acceleration of 9.8 m/s2. The housing diameter is 13 mm and the bolt length is 10 mm. Version of the electromagnet without locking nut on the bolt. The electromagnet is equipped with two supply cables 25 cm long with insulation removed at the ends. The device can be used in electrical machines, industry, medicine, loudspeakers, etc. The set does not include a reversing spring.
Push-pull solenoid 12 V 0.6 kg 13 mm.
The electromagnet consists of two parts.
Specification of the electromagnet
- Design: push version (pushing)
- Supply voltage: 12 V
- Pushing force: 0.6 kgf (pushes a mass of 0.6 kg for an earth acceleration of 9.8 m/s2)
- Bolt stroke: 5 mm
- Bolt length: 10 mm
- Housing diameter: 13 mm
- Housing length: 36 mm
- Length of power cables: 25 cm
- Wires with stripped insulation at the ends
A wide range ofelectromagnetsis available in our shop- checkit out.
