- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The set includes: chassis with DC motors, main board (compatible withArduino Uno) along with motor controller, speed sensors, buzzer, accelerometer, limit switch and others. Elements allow the construction of mobile robots, for example, the line follower. The set can be programmed from the Arduino IDE using, included in the set, miniUSB cable.
|
A detailed description can be found in the manufacturer's user manual. |
Chassis
The chassis is two-board platform made of ABS material, to which mounted are two DC motors with wheels with a diameter of 65 mm. Elements of the chassis have mounting holes allowing you to install various sensors and controllers.
This is the third version of the robot, in which the color of the chassiswas changed and motors with bilateral shaft wereadded. They allow for the installation of the sensor directly on the motor shaft, so the user gets a higher resolution of the measured size.
Main board
The main module has mounting holes and multiple sockets for the connection of sensors, motors and servos. For programming used is miniUSB connector, the heart of the system is microcontroller ATmega328 compatible withArduino Uno.
Main Redbot boardcompatible with Arduinotile page.
|
The product is compatible with Arduino Main board is compatible with the Arduino environment, and this means that for programming the robot sufficent is the installed Arduino IDE and the included in the set miniUSB cable. The manufacturer providesa libraryfor the service of the units in the set. |
Set includes
- 1 x main board:
- compatible withArduino Uno
- includesdouble driver of TB6612 motors
- works with voltage of 5 V
- 1 xMMA8462Q accelerometer(documentation)
- 2 x collision sensors - in the form of the limit switch
- 3 xtheQRE1113GR line sensors(documentation)
- 1 xbuzzer- simple sound generator
- 1 xset of encoders - they are the rotary speed sensors
- 5 x 3-pin connection cables
- 2 x DC motors
- Working voltage: 4.5 V
- Torque: 0.8 kg*cm (0.78 Nm)
- Motor speed with no load: 140 +/- 10 rpm
- Consumption of current of motor without load: 190 mA (250 mA max.)
- The current consumption of the motor at the fixed shaft: 1 A
- 1 x chassis, comprising of:
-
- Two mounting platforms
- Two wheels with tires with a diameter of 65 mm
- Metal and plastic units
- 1 x basket for the batteries (4 x AA) with DC connector (batteries are not included, they canbe purchased separately)
- 1 xmini USB cablefor programming
- 1 xscrewdriver for mounting elements
The contents of theRedBot Basic Kit SparkFun.
Specification
- Controller compatible with Arduino Uno
- Double driver of the TB6612 motors
- Color sensors for line detection
- Sound generator - buzzer
- Accelerometer MMA8452Q
- Measuring range: optional ±2 g / ± 4 g / ±8 g
- Resolution: 12 - bit
- Motors
- Working voltage: 4.5 V
- Torque: 0.8 kg*cm (0.78 Nm)
- Motor speed with no load: 140 +/- 10 rpm
- Consumption of current of motor without load: 190 mA (250 mA max.)
- The current consumption of the motor at the fixed shaft: 1 A
- Wheels:
- Diameter: 65 mm
- Width: 30 mm
- Plastic rims with rubber tyres
- Design size: 110 x 174 mm
Our offer has alsoseparate units for building the Kit RedBot robot.
|
Set requires self-assembly, instructions can be found onthe website of the manufacturer. |
