- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Linear actuator with 20:1 gear reduction, working load up to 50 kg and a speed of 1.3 cm/sec. It is supplied with 12 V voltage, consumes 500 mA at no load (max 10 A). When the stroke is locked, this value can increase up to 10 A. There are limit switches on the ends, which prevent the stroke from exceeding the limited range. This version has a 25 cm stroke and a built-in potentiometer, which enables reading the position in the form of analog voltage.
Specification
- Supply voltage: 12 V
- The parameters for 12 V:
- Current consumption without load: 500 mA
- Maximum supply current (with locked stroke): 10 A
- Linear velocity: 1.3 cm/sec
- Maximum load: 50 kg
- Built-in potentiometer that determines the position output in the form of an analog signal
- Range of the stroke: 25 cm
- Weight: 1532 g
Connection
The device has the following wires:
- Red and black - actuator power supply. Depending on the polarity the motor will push the stroke in or out.
- Yellow - potentiometer power supply - the positive pole VIN.
- White - potentiometer power supply - ground.
- Blue - feedback. The analog voltage determining the position of the stroke.
For controlling the actuator you can use any driver with the parameters in accordance with the motor, for example, HighPower systems. In our offer we also have the JRK 21v3 driver, which supports feedback.
Useful links |
