- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Description
Module working in awi-fi 802.11 b/g/nstandard at 2.4 GHz frequency. It communicates through theUART interface, RX and TX pins, it works with a voltage of 3.3 V. It has the ability to connect up to32 clients simultaneously. It has a built-in LED and aPCB antenna. Board sizes: 40 x 25 mm.
|
Specification
- Supply voltage: 3.3 V
- Operating current: 170 mA to 300 mA
- AP+STA mode support
- Supports 2 x TCP, i.e. two network connections at the same time
- Supported encryption:
- WEP
- WPA-PSK
- WPA2-PSK
- WAPI
- Supported LAN protocols: IEEE 802.11 b/g/n
- Supported network protocols:
- TCP
- UDP
- ARP
- ICMP
- HTTP
- DNS
- DHCP
- Support for the router and bridge architecture
- Support for the AT instructions
- The ability to configure through the website
- Data transfer rate up to 460800 bps
- Built-in mechanisms of Watchdog timer and Heartbreak
- Pins pitch: 2.00 mm
- Built-in PCB antenna
- Working temperature: - 20°C to 80°C
- Module dimensions: 40 x 25 mm
Useful links |
