- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A digital proximity sensor which is doing the measures with the Time of Flight method. It works in the range of up to 1000 mm. It communicates with the I2C interface. It is working with the voltage from 3 V to 5 V.
Method of time-of-flight is to measure the time from emitting a pulse from an infrared laser until its return to the detector. It doesn't depend on the reflection of light from the object.
|
The product is compatible with Arduino Library to connect to theArduinocan be found atthis address. |
Pins
On the board are 6 pins for self-assembly of connectors of goldpin type - pitch of 2.54 mm (included). In addition, 2 STEMMA QT connectors are also placed on the board.
| Name |
Description |
|---|---|
| VIN | powered with voltage of 3 V to 5 V |
| GND | The ground of the system. |
| SDA |
I2C data line. |
| SCL |
I2C clock line. |
| XSHUT |
The Pin disabling the module actived with the low status. Low status switches the sensor into standby mode. Details inthe documentation. |
| GPIO1 | Programmable interrupt output. |
Specification
- Supply voltage: 3 V to 5 V
- Measuring range: from 30 mm to 1000 mm (at white reflective surface from 1.5 m to 2 m)
- Interface: I2C
- Dimensions: 25 x 18 x 4 mm
- Weight: 1.3 g
- Included is goldpin strap
Useful links |
