- New
- Sale
- Sale
Grove modules - Strona 5
Loading...
Grove - 6-axis accelerometer and gyroscope LSM6DS3 - Seeedstudio 105020012
The module is equipped with a 6-axis accelerometer and a gyroscope based on the LSM6DS3 system with a built-in power regulator. It allows to measure 6 sizes: acceleration X,...
Index: SEE-15559
Index: SEE-15559
Grove - set of 5 female-female 4-pin - 2mm / 40cm with latch
A set containing five 4-pin Grove cables with a clip, 40 cm long. The cables are used to connect the sensors to the Grove connector with the base cover.
Index: SEE-15574
Index: SEE-15574
Grove ADS1115 - 4-channel 16-bit ADC for Raspberry Pi - Seeedstudio 103030279
Grove 4-channel 16-bit ADS1115 ADC is an analog-digital converter (ADC) in the form of shield for GPIO connectors of Raspberry Pi. It is 4-channel ADC based on the ADS1115...
Index: SEE-13814
Index: SEE-13814
Grove - ADC converter for HX711 load cell sensors - Seeedstudio 101020712
Arduino compatible 24-bit ADC converter module allows to read values from pressure sensors. It has built-in amplifier with optional 32 dB, 64 dB and 128 dB gain. On the board...
Index: SEE-15855
Index: SEE-15855
The control module from a Grove series. It has a built-in tact-switch system and pull-down resistor. It communicates with the microcontroller through a digital signal.
Index: SEE-13344
Index: SEE-13344
Grove - digital PIR motion sensor - Seeedstudio 101020793
PIR sensor for motion detection using IR diodes. It allows to generate low or high state at the output. It does not require Arduino library for proper operation. It detects...
Index: SEE-16909
Index: SEE-16909
Grove Beginner Kit with 10 Sensors and Seeeduino Lotus - Seeedstudio 110061162
The kit includes 10 popular sensors with a Grove connector and a Seeeduino Lotus module with an ATmega320P microcontroller. The pinout is compatible with the Arduino Uno....
Index: SEE-17042
Index: SEE-17042
Grove - laser dust sensor / air quality PM2.5 (HM3301) - 5V
Grove Laser PM2.5 Sensor (HM3301) is a new generation of the laser sensor of dust / air quality, which in real time, allows for monitoring of air quality. It is e quipped with...
Index: SEE-13812
Index: SEE-13812
Motion sensor type PIR interface is compatible with Grove series. Object detection is indicated by a digital position in a high pin SIG. The range can be set within the range...
Index: SEE-11343
Index: SEE-11343
Grove - GrovePi+ v3.0 Shield for RaspberryPi 4/3/2/B/B+/A+
Shield for Raspberry Pi is equipped with a w15 4-pin connectors for connecting sensors from the Grove minicomputer series. It cooperates with more than a hundred modules.
Index: SEE-04451
Index: SEE-04451
Adjustable motion PIR sensor with an interface compatible with the Grove series. It's a simple to use passive infrared sensor. Object detection is indicated digitally - via...
Index: SEE-13813
Index: SEE-13813
Grove - 2-channels relay with optoisolation - 10A/250VAC - coil 5V + clear case
The module has two SRD-05 relays with the coil powered with the voltage of 5 V with optical insulation of input and mounting holes. The system allows you to control...
Index: SEE-12626
Index: SEE-12626
Grove - OLED 0,96'' (SSD1315) 128x64px SPI/I2C display - Seeedstudio 104020249
Bicolor (blue and yellow) display with 0.96'' diagonal and 128 x 64 px resolution. The product is based on SSD1315 chip, using SPI/I2C bus for communication. It works with...
Index: SEE-20125
Index: SEE-20125
Grove - mini limit sensor with roller
Module from the Grove series equipped with a limit switch with lever ended with roller. Working voltage is 3.3 V and 5 V. T he kit includes a cable adapted to Seeedstudio Base...
Index: SEE-11335
Index: SEE-11335
Grove - SI1151 solar light sensor v2.0
The Grove module based on the SI1151. Multi-channel, digital light sensor to detect visible light and infrared light. It is working with voltage from 3 V to 5.5 V. It...
Index: SEE-11353
Index: SEE-11353
Grove - module with passive buzzer - Seeedstudio 107020109
A module with a passive buzzer that allows you to change the sound tones by adjusting the PWM frequency. The buzzer can be used as an alarm siren, its maximum volume is 80 dB...
Index: SEE-17268
Index: SEE-17268
Grove - Arduino Sensor Kit - set of 10 modules with BaseShield for Arduino - Seeedstudio 103030375
Set consisting of 10 different sensors and modules . The modules are placed on a single board, allowing you to keep order, there is no need for an additional contact board....
Index: SEE-18553
Index: SEE-18553
Grove - LCD display 2x16 characters with RGB backlight
LCD display 2x16 characters with backlight in any color palette RGB. Communicates with the two-wire I2C bus. It is supplied with the voltage from 3.3 V to 5 V. T he kit...
Index: SEE-11326
Index: SEE-11326
Grove - VL53L0X Time of Flight - distance sensor - I2C
The VL53L0X laser distance sensor measures with Time of Flight technology. It is equipped with a diode emitting a 940 nm long beam. It can measure distances from 3 cm to 100 cm...
Index: SEE-15331
Index: SEE-15331
Grove Starter Kit for Raspberry Pi Pico
Grove is a modular system designed to create simple projects that use components based on the same interface. The Grove starter kit designed for Raspberry Pi Pico will...
Index: SEE-19125
Index: SEE-19125
Grove - LCD display v2.0 2x16 characters with backlight (Black on Red)
Grove module with 2 x 16 characters monochrome LCD display with high brightness backlight. It communicates via the two-row I2C bus. It is powered from 3.3 V to 5 V. A Grove...
Index: SEE-14734
Index: SEE-14734
Grove - PCA9685 - 16-channel server driver, 12-bit PWM I2C
A 16-channel PWM generator useful when there is no microcontroller output. It allows, among others: controlling servomechanisms, adjusting motor speed or changing LED...
Index: SEE-13511
Index: SEE-13511
Grove - radio transmitter + 433MHz receiver module
Set from Grove including the transmitter and receiver that communicate with each other at a frequency of 433 MHz . It works with voltage of 5 V. Supports the ASK modulation....
Index: SEE-11294
Index: SEE-11294
High-class 4-channel relay for using the maximum voltage of 250 V and a current of 10 A.
Index: SEE-14418
Index: SEE-14418
See also
- Resistance sensors
- Door sensors
- Piezoelectric sensors
- RPM sensors
- Twilight sensors
- Tilt sensors
- Accelerometers
- Inductive sensors
- Hall effect sensors
- Oxygen sensors
- Optical sensors
- Alarm sensors
- 9DoF IMU sensors
- Pressure sensors
- Air quality sensors
- Sound sensors
- Gesture sensors
- Sensors of light and color
- Gas sensors
- Limit switches
- Magnetic sensors
- Medical sensors
- Pressure sensors
- Sensors odbiciowe
- Distance sensors
- Inductive contactless sensors
- Weather sensors
- Liquid level sensors
- Current sensors
- Flow sensors
- Motion sensors
- Temperature sensors
- PT100 temperature probes
- Humidity sensors
- Fingerprint readers
- Encoders
- Photoresistors
- Phototransistors
- IR receivers
- Magnetometers
- Gyros
- Sensor sets
- Gravity modules