Product description: Rebel RB-202 Clamp Meter
Clampmeterenables measurement of AC current using current clamps. Thanks to this it is possible to make measurements without cutting the cable and connecting ammeter. The multimeter also allows to measure parameters such as: DC voltage, AC voltage and resistance. It can also be used to test circuit continuity and diodes. The device is equipped with a Data Hold function that allows you to keep the last displayed measurement, a MAX function that allows you to determine the maximum value that was achieved during the measurement and a low battery warning system.
Batteries for powering the device are included.
The set also includes a case for easy storage of the meter.
Features of the RB-202 meter
- Manual and automatic change of measuring ranges
- Current measurement by current clamps
- Data Hold function
- Automatic polarity detection
- Sampling frequency 2 times per second
- Maximum reading on the display: 1999
- Battery power supply 2 xAAA
Technical specification
| Parameter | Range |
|---|---|
| DC voltage | 200 mV / 2 V / 20 V / 200 V / 600 V |
| AC voltage | 200 mV / 2 V / 20 V / 200 V / 600 V |
| DC DC current | no |
| AC alternating current | 2 A / 20 A / 200 A / 400 A |
| Resistance | 200 Ω / 2 kΩ / 20 kΩ / 200 kΩ / 2 MΩ / 20 MΩ |
| Capacitance | no |
| Frequency | no |
| Automatic range selection | yes |
| Standby mode | no |
| Transistor tester | no |
| Circuit continuity tester | yes |
| Temperature measurement | no |
| Diode tester | yes |
| Battery tester | no |
| Display | LCD 35 x 18 mm |
| Power supply | 2 x AAA battery (included) |
| Dimensions | 210 x 76 x 25 mm |
| Weight | 194 g |
