- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Pine H64 Model B WiFi Bluetooth- Allwinner H6 Cortex A53 Quad-Core + 2GB RAM
H64mini-computer based onAllwinner H6Quad-CoreCortex-A53processor. Equipped with2 GBLPDDR3 RAM, Gigabit Ethernet, Wi-Fi, Bluetooth 4.0, 2x USB 2.0, USB 3.0, HDMI 4K,microSD cardslot, eMMC memory, 2x20-pin GPIO, 3.5 mm miniJack and IR receiver. Powered by5 V / 3 Athrough3.5 / 1.35 mm DCport.
The device has 2 USB 2.0 ports, 1 USB 3.0 host, HDMI, Ethernet port and many others.
What do you need to run the H64 minicomputer?
- MicroSD memory card -the medium on which theoperatingsystem will be installed
- The power supply:
- 5 V / 3 A DC3.5 mmjackfor the minicomputer itself
- HDMI cable - toconnect the device to a monitor
- Mouse and keyboard- to control and enter data into the device
- Connected internet - for software download
Operating system for H64
H64 minicomputer cooperates with many systems including Armbian Debian, LibreELEC, AOSC and Android. The disk of the device is amicroSDcardoreMMC memory.
Installation of the system is very easy - checkthe manual! |
Minicomputer Pine H64 - top view.
Communication in Pine H64
ROCKPro64 has basic communication interfaces that can be found in PC-class office computers. The user has it at his disposal:
- two USB 2.0 and one USB 3.0 ports,which can be used to connect e.g. a mouse, a keyboard or a flash drive. If it turns out that there are too few sockets, you can increase their number usingan external USB HUB.
- Gigabit Ethernet socket, i.e. the possibility of direct connection to the LAN.
- GPIO x 40 and 22 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART. Compatible withRaspberry overlays
- microSD slot- a slot for a microSD memory card on which the operating system can be installed.
- WiFi module- allows you to communicate with the 802.11b/g/n wireless network.
- Bluetooth4.0module- enables data transmission via a popular interface.
Pine H64 has a connector for microSD memory card.The card is not included in the set it can be purchased separately.
Power supply of H64 mini-computer
The system uses a 3.5 / 1.35 mm DC connector as its power source. The manufacturer recommends that the voltage given on the connector should be 5 V, while the current capacity of the power supply used should be at least 3.0 A. In our offer you will find dedicatedpower supplies.
ROCKPro64has an HDMI connector,through whichyou can transmit both video and audio in 4K quality.
Specification and comparison of Khadas VIM3 and Raspberry Pi 4B
Basic information | |||
---|---|---|---|
Model | Raspberry Pi 4 model B | Pine H64 | |
Edition | 6 - 2019 r. | 2018 r. | |
Technical specification | |||
Chipset processor | Broadcom BCM2711 64-bit | Allwinner H6 | |
Core | Quad-Core ARM Cortex-A72 |
Quad-Core ARM Cortex-A53 |
|
Operating systems |
Linux Raspbian Windows 10 loT |
Linux Ubuntu / Armbian Android Pie LibreELEC AOSC Android 7 |
|
Clocking | 1.5 GHz | 1.5 GHz | |
Architecture | ARMv8-A | ARMv8-A | |
Memory RAM |
Three versions
|
2 GB LPDDR3 |
|
Memory | microSD card |
eMMC microSD card |
|
GPIO socket |
40-pin connector (2x20 pin) raster 2.54 mm |
40-pin connector (2x20 pin) raster 2.54 mm |
|
Power supply |
|
|
|
Dimensions of the tiles | 85 x 56 x 17 mm | 85 x 56 x 17 mm | |
Interfaces | |||
USB interface |
2x USB 2.0 - socket type A 2x USB 3.0 - socket type A |
2x USB 2.0 - socket type A 1x USB 3.0 - socket type A |
|
Network interface | Ethernet port 100/1000 Mbps | Ethernet port 100/1000 Mbps | |
WiFi interface |
Dual Band 2.4 GHz and 5 GHz 802.11 b/g/n/ac |
2.4 GHz 802.11 b/g/n |
|
Bluetooth | Low Energy, BLE 5 | Low Energy, BLE 4.0 | |
Camera | CSI socket |
- |
|
DSI socket | DSI socket |
- |
|
Video |
2 x microHDMI H.265 4K 60 fps H.264 1080p 30 fps OpenGLES 1.1, 2.0, 3.0 |
1x HDMI 4K 60 fps OpenGLES 1.1, 2.0, 3.0, 3.1 OpenCL 1.1, 1.2 ARM Mali T-720 MP2 Dual-Core |
|
Communication | UART, SLEEPING, I2C, GPIO | UART, SLEEPING, I2C, GPIO | |
Additional |
RTC connector Infrared receiver SPDIF connector Power and Reset buttons Pi-2 Bus |
Useful links |