- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: NANO-US 125 kHz RFID module
MiniatureRFID proximity cardreader,operating at 125 kHz. It is compatible with the following standards: Unique, Q5, HITAG 1, HITAG 2 (ID reading only), HITAG S, HID.The module uses RS232 (TTL) interface with line control output: RS485, I2C, SPI, 1-Wire, WIEGAND. Reader version designed for SMD surface mounting. NANO-US has ananti-collision outputfor modules working in a short distance and the possibility of protecting data with a password.
|
The device software is updated via RS232 interface byNEFIRprogram. |
NANO-US RFID module 125 kHz.
NANO-US module specification
- Module supply voltage: 5 V
- Transponder frequency: from 120 kHz to 130 kHz
- Types of supported transponders: Unique, Q5, HID, Hitag-1, Hitag-S, Hitag-2
- Indicative communication range with transponders:
- Unique, Q5: 12 cm
- HID: 8.5cm
- Hitag: 13 cm
- Power consumption:
- Autoreader mode: 35 mA
- When the field is off: 12 mA
- When the field is activated: up to 100 mA (depending on the antenna used)
- Sleep mode: up to 1 µ A
- Two-way interfaces supported:
- RS232 TTL version with RS485 driver control output
- SPI
- I2C
- Unidirectional interfaces supported:
- 1-WIRE (DS1990 emulation of pastilles)
- WIEGAND
- Any destination inputs/outputs: 5 configurable
- Operating temperature: -20°C to 70°C
- Module dimensions: 17.5 x 17.5 x 3 mm
Supported functionalities of individual transponders.
Useful links |
