- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: UW-DAL wall-mounted RFID reader - 125 kHz
Card and RFID transponder reader, wall mountable. Works on 125 kHz. It is a contactless data reading device, compliant with Unique standard (EM4102). Each Unique transponder has a unique 40-bit identification number. The reader sends this number using1-Wire communication protocol in Dallas format, compatible with DS1990 pills. The UW-DAL has a built-in antenna, two LEDs, relay and buzzer.
UW-DAL wall-mounted RFID reader - 125 kHz.
Description of outputs and elements placed on the housing
The UW-DAL wall-mounted RFID reader has the following output and elements placed on the enclosure:
| Item number | Description |
|---|---|
| 1 | VCC - power supply |
| 2 | GND |
| 3 | 1-Wire (data output) / RS232 TX |
| 4 | Red LED / RS232 RX power input |
| 5 | Red LED |
| 6 | Green LED (indicates power supply) |
| 7 | Push button (short-circuits 1-Wire bus to ground) |
Specification of the UW-DAL RFID reader
- Supply voltage: 7 V to 25 V
- Power supply current from 30 mA to 55 mA
- Frequency of operation: 125 kHz
- The speed of reading data from the transponder: RF/64 (1953 b/s)
- Reading range: up to 15 cm
- Interfaces supported:
- 1-Wire (Dallas ds. 1990)
- RS232 TTL
- Built-in:
- Antenna
- LEDs
- Buzzer
- Relay
- Dimensions: 82 x 82 x 22 mm
The set includes
- UW-DAL wall-mounted RFID reader
- Screw connections
- Screws and studs
Useful links |
