- EOL
Attention! The product has been discontinued. Check other products in category. |
Description: Particle Tracker SoM Kit - evaluation kit LTE CAT1/3G/2G
Complete, open source evaluation board withParticleTracker SoM module. The board allows GSM communication in LTE CAT1 / 3G /2Gstandard.It is equipped with connectors for connecting different sensors, buttons and power supply. Additionally, the set includes aGrove temperaturesensor and an antenna.
Evaluation board Particle Tracker SoM.
The layout of the elements on the Tracker SoM Kit board
The board is equipped with buttons, USB connectors, RGB LED,GPIO connectors andmuch more. More details can be found below.
Lp. | ID | Description |
---|---|---|
1. | GNSS USB | USB u-blox GNSS connector |
2. | USB CELL | Quectel modem with USB connector |
3. | JTAG | JTAG/SWD debugger connector for nRF52 |
4. | NFC | NFC antenna connector for NFC tag function |
5. | MODE | MODE button |
6. | RGB | RGB status LED |
7. | RESET | RESET button |
8. | MCU USB | C-type USB connector for debugging or powering the nRF52 system |
9. | J8 | 3.3 V LED jumper, default closed |
10. | 3V3 LED | LED for power supply |
11. | LED STATUS | LED for charging the battery |
12. | J9 | STAT LED jumper, default closed |
13. | VIN | external power supply connector from 5 V to 12 V |
14. | LiPo | JST-PH connector for Li-Pol battery |
15. | S4 | battery switch |
16. | S6 | SoM power switch |
17. | - | GPIO output connector |
18. | J10 | Grove connector (A0, A1, I2C) |
19. | J11 | Grove connector (A2, A3) |
20. | S5 | RTC battery switch |
21. | RTC battery | optional RTC battery |
22. | J4 | CAN data connector and 3.3 V output |
23. | J5 | CAN power jumper (selectable 3.3 V and 5 V) |
Power supply for the plate
Tracker SoM can be powered in three different ways:
- viaa USB MCU connector- when using a laptop or computer with a 5 V / 500 mA USB connector, you should additionally use the Li-Pol package to power the device. The module requires a 5 V / 2 A power supply.
- VIN connector- allows you to connect an external power supply from 5 V to 12 V.
- Li-Pol connector- JST-PH allows for connecting a Li-Pol battery. Switch S4 activates power supply using the battery.
Tracker SoM specification
- Power supply: 5 V to 12 V, 5 V / 2 A, Li-Pol
- Communication: LTE CAT1 / 3G / 2G
- USB u-blox GNSS connector
- Quectel modem USB connector
- JTAG/SWD degger connector for nRF52
- NFC u.FL antenna connector
- MODE and RESET buttons
- RGB status LED
- USB connector for debugging
- Power and charging status LED
- JST connector for Li-Pol battery
- Switches for USB, battery power and RTC
- Full GPIO output
- Grove connectors: 2 pieces.
- Lozenge battery slot for RTC
- CAN connector (with 3.3 V output)
- Dimensions: 164 x 97 x 14 mm
Useful links |