- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Platform, works with AA batteries, with actuator in the form of two DC motors with reducer 87:1. The kit can be controlled using any system microcontrolled motor driver, for example, Arduino module with a connected unit TB6612. Power supply is facilitated by a battery container with wires for battery type AA (sold separately). We recommend you to use long-lasting NiMH battery.
|
This version has the speed sensors - encoders. A detailed description can be found inthe user guide. |
Video
Video about DAGU chassis.
The set of 2 sensors that give 1000 pulses over 3 revolutions of the output shaft. Chassis allows to install up to 4 sensors.
Dimensions
- Complete chassis:
- Length: 254 mm
- Width: 225 mm
- Height: 74 mm
- The diameter of the rollers: 30 mm
Dimensions of chassis Rover ROV5-1.
Includes:
- 2 x DC motors with reducer 87:1
- Supply voltage:from 5 V to 7.5 V
- Current consumption: 160 mA
- Rotation speed output: 8804 ± 10% rpm
- Torque output: 10 kg*cm (1 Nm)
- Speed: 1 km/h
- Connection: red wire and black
- 2 x sensors
- Type: Hall sensors
- Resolution: 1000 pulses for 3 revolutions
- 1 x assembled chassis of the robot
- 2 x track straps
- 1x container for 6 AA batteries
- 1 x screwdriver
- 1 x key
Useful links |
