- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Seeed studio touch screen - resistance LCD 5'' 800x480px for BeagleBone
A5-inchSeeed Studiotouchscreen,resistivefor bothBeagleBone GreenandBeagleBone Blackmini-computers with800 x 480 pxresolution. Equipped with5 buttons, which provide alternative screen control and two LEDs responsible for power and usage status indications. Configuration issimple and intuitive, just connect the pins at the back of the screen withBeagleBone Green or BlackI/O leads, which provide power and signal to the display. The overlay can also be powered via the built-in micro USB port on the back of the display.
| The screen is only compatible with SeeedStudioBeaglebone GreenandBeaglebone Black. |
Seeed studio touch screen - resistance LCD 5'' 800 x 480 px for BeagleBone
Resistance LCD touch screen 5'' 800 x 480 px
Seeed Studio screen features for BeagleBone
- Resolution up to 800 x 480 px
- Resistance contact
- 5 control buttons: Left, right, up, down and enter
- Supported systems:
- Debian
- Angstrom
- WinCE
- Android 4.2 via a user-defined driver
- ULP backlighting (Ultra Low Power)
- 4 x 3 mm mounting holes
- Built-in USB connector for power supply
Technical specification of the screen module for BeagleBone
| Parameter | Scope |
|---|---|
| Voltage |
5 V DC |
| The current |
110 mA (test conditions: Green Beaglebone does not apply) |
| Power |
0.55 W (Test conditions: Green Beaglebone does not apply) |
| Dimensions |
130 mm x 86.5 mm x 19 mm |
| Mass |
120 g |
| Resolution |
800 x 480 px |
| Touch panel type |
Resistance |
| Alternative control |
Yes, 5 buttons (LEFT, RIGHT, UP, DOWN and ENTER) |
| Supported systems |
Debian, Angstorm, WinCE, Android 4.2 |
| Mounting holes |
Yes, 4 x 3 mm |
Useful links |
