- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: V-Slot C-Beam 250 mm linear guide - silver - assembly kit
Silver V-Slot linear guide made of aluminum profiles from the C-Beam series, 250 mm long. It will be used in the construction of CNC milling machines, 3D printers and many other structures. There is a table on the guide that moves in the range of 150 mm . The set does not include a stepper motor necessary for the correct operation of the linear guide.
The guide moves on the basis of four Mini V rollers inside the C-Beam guide. The outer grooves of the profile allow the installation of additional accessories. The C-Beam cover provides an elegant look and at the same time protects the trapezoidal screw from contamination.
Specification of the V-Slot linear guide
- Profile: C-Beam
- Silver color
- Accuracy: 0.05 mm to 0.1 mm
- Positioning accuracy: 0.091 mm
- Load: 115 N
- Maximum speed: 8000 mm / min
- Length: 250 mm
- Table movement: 150 mm
- Motor : NEMA23 1.8 ° (not included)
The assembled kit consists of:
- M5 screws 25 mm - low profile - 4 pcs.
- M5 screws 20 mm - low profile - 10 pcs.
- M5 screws 55 mm - low profile - 2 pcs.
- Aluminum spacers 6 mm - 2 pcs.
- Aluminum spacers 40 mm - 2 pcs.
- Aluminum spacers 3 mm - 2 pcs.
- Flexible connector 1/4 "8 mm - 1 pc.
- Eccentric nut 6 mm - 2 pcs
- Ball bearing 688Z 8 x 16 x 5 - 2 pcs.
- 8 mm washer - 2 pcs.
- Clamping ring 8 mm - 2 pcs.
- Xtreme Mini V Wheel Set - 4 pcs.
- C-Beam end plate - 2 pcs.
- Gantry Plate C-Beam mounting plate - 1 pc.
- Anti-backlash nut block - 1 pc.
- C-Beam guide - 1 pc.
- Trapezoidal screw 8 mm - 1 pc.