- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: NANO-MS RFID module - 13.56MHz
RFIDproximity cardreader, operating at 13.56MHz.The miniature device is compatible with transponders operating in MIFARE standard. NANO-MS uses RS232 (TTL) interface with RS485 line control output with addressability on data bus in RS485, 1-Wire, I2C, SPI, WIEGAND mode. The device offers the possibility of protecting data with a password and an anti-collision output, which ensures correct operation in case of readers installed close to each other. Version designed forSMD surface mounting.
NANO-MS RFID module - 13,56MHz.
Specification of the NANO-MS module
- Supply voltage of the module: 3.3 V
- Transponder operating frequency: 13.56 MHz
- Types of supported MIFARE transponders:
- S50, S70, U.L.
- ID reading only: Desfire, SmartMX
- SL1 operation and ID reading: Plus
- Indicative communication range with transponders:
- MIFARE S50: 6 cm
- MIRAFE Plus: 4 cm
- Power consumption:
- Autoreader mode: 25 mA
- When the field is switched off: 16.5 mA
- When the field is activated: up to 70 mA (depending on the antenna used)
- Sleep mode: up to 1 µA
- Two-way interfaces supported:
- RS232 3.3 V version with RS485 driver control output
- SPI
- I2C
- Unidirectional interfaces supported:
- 1-WIRE (DS1990 emulation of pastilles)
- WIEGAND 37
- Any destination inputs/outputs: 5 configurable
- Control of two-state outputs
- Reading binary inputs
- Programming function of NFC cards and tags according to ISO/IEC14443 standard
- Operating temperature: -20°C to 70°C
- Module dimensions: 17.5 x 17.5 x 3 mm
Useful links |
