- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Wixel programmable wireless module
The Wixel module by Pololu is a general purpose programmable wireless system. It works at the frequency of 2.4 GHz. The programming is possible thanks to the USB interface. The heart of the module is a Texas Instruments microcontroller: CC2511F32 (24 MHz, 4KB RAM, 29KB Flash) with an integrated radio transmitter / receiver. There are also 15 input / output lines at the user's disposal, including 6 analog outputs. In order to facilitate the use of the system, the manufacturer provides auser manual.
To create a wireless connection, at least two Wixel modules are required. The board is connected to the computer by means ofthe USBA<->miniUSB B cable.
|
At the customer's request, we can provide an assembled system with soldered connectors. For this purpose, please leave information in the order comment. |
Main features of the Wixel programmable wireless module
- 2.4 GHz frequency with 256 channels
- Full speed USB
- Programming via the derived USB interface
- It does not require an additional programmer
- It has protection against reverse power connection
- USB - UART adapter function
- 3 LED indicators
- 15 I / O lines, including 6 analog inputs
- USART
- SLEEPS
- Timer with PWM
- Radio:
- Frequency: 2400 - 2483.5 MHz
- Range: about 15 m
- Speed: Adjustable up to 350 kbps
- Effective data transfer speed up to 10 kB / s
Wixel as a wireless serial port
Two modules can be used as a wireless serial port and create a connection between a computer and a microcontroller located, for example, in a robot. This enables, for example, remote data exchange or remote programming. The systems can be used as a communication system between robots. The speed of receiving or reading data reaches 10KB / s at a distance of up to about 15m.
Wixel module configuration tool.
Wixel programmable wireless module specification
- Microcontroller: CC2511F32, 24MHz
- RAM memory: 4 KB
- Flash memory: 29 KB
- Number of I / O lines: 15
- Supply voltage: 2.7 V - 6.5 V
- Current consumption: about 30mA
- Protection against reverse power connection
- It does not require an additional programmer
- Dimensions: 18.8 x 38 mm
- Weight: 3.2 g (without goldpin connector)
