- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Product description: NanoPi M1 - Allwinner H3 Quad-Core 1.2GHz + 512MB RAM
NanoPi minicomputerbased on AllwinnerH3 quad-coreARM Cortex-A7 processorwith1.2 GHzclock.The module is equipped with512 MB ofDDR3RAM, built-inEthernetport100 Mbps, 40 pin GPIO compatible with RaspberryPi.
NanoPi M1 Minicomputer. Its undoubted advantage is small size 64 x 56 mm.
What will we need to run a NanoPi minicomputer?
- DC power supply with microUSB plug- The device needs a 5-volt power supply with 2 A capacity.
- MicroSD memory card- The medium on which the operating system will be installed.
- Peripheral devices- Mouse and keyboard will allow convenient control.
- HDMI Cable- allows to display information on our monitor.
This way we will be able to proceed with the installation of the system. NanoPi works with Debian and Ubuntu Mate. The data carrier of the device can be a microSD card. On the manufacturer's website you will findaready to downloadoperating systemas well as a guide toinstalling the system,so you shouldn't encounter any problems.
| NanoPi series is not only the M1 model. In our offer you will find awide range of NanoPi family minicomputers. |
The most important features of the NanoPi M1 minicomputer
NanoPi M1 is an inconspicuous device with all the basic interfaces used for communication that can be found in PCs. On board the minicomputer you will find, among others:
- 3 USB connectors, underwhich we can connect peripheral devices such as mouse, keyboard, WiFi card. In case we run out of free ports, increase their number usingan external USB hub.
- Gnizado Ethernet,which means the possibility of direct connection to the LAN.
- GPIO x 40 pin- Inputs/outputs to be used by the user, can be used to operate motor controllers, LEDs or buttons. These include pins supporting communication interfaces such as I2C, UART or SPI. GPIO compatible with RaspberryPi.
- HDMI connector -transmits video to the monitor.
- MicroSD slot- card slot on which the operating system can be installed or used as a data storage.
- MicroUSB- used to power the minicomputer. The manufacturer recommends power supplies with a voltage of 5 V and a current of at least 2 A.
View on NanoPi M1 connectors.
Specification . |
|
| Model | NanoPi M1 |
| Specification |
|
| Processor | Allwinner H3 |
| Core |
Quad-Core ARM Cortex A7 |
| Graphics |
Mali400MP2 600MHz, OpenGL ES2.0 |
| Systems |
Debian Ubuntu Mate |
| Clocking | 1.2 GHz |
| Memory RAM |
1 GB |
| Memory |
microSD card |
| GPIO socket |
40 pins, RaspberryPicompliant |
| Power supply |
5 V / 2 A - microUSB |
| Dimensions of the tiles | 64 x 56 mm |
| Interfaces | |
| USB Host |
3 x USB 2.0 |
| Network interface | Ethernet 10/100 Mbps |
| Video | HDMI 1.4 1080p |
| Audio |
HDMI / 3.5 mm jack, built-in microphone |
| Communication |
UART, SPI, I2C, GPIO, PWM |
| Debugger |
Serial port 4pin / 2.54mm |
| Additional |
Reset button, built-in LED, built-in infrared receiver |
Useful links |
