- EOL
|
Attention! Sale of this product has ended. Check others in this category. |
Product description: Mini shield for NanoPi NEO Core / Core 2
Mini shield is an extension module for NanoPi NEOCore / Core 2 equipped with USB, Ethernet, debugging, 3.5 mm audio jack input / output ports. The chip expands GPIO by 26 additional pins. Allows you to connect an SSD. Thanks to Mini Shield you can easily connect any peripherals to your NanoPi, such as displays.
Description of elements installed on the board.
Mini shield specification for NanoPi NEO Core / Core 2
- Ports
- 1 x JMS567 USB - SATA IC
- 1 x M.2 SSD
- 2 x USB
- 1 x Ethernet
- 1 x debugging port
- GPIO: 2 x 13 pins
- 1 x SPI Flash
- Audio: 1 x 3.5 mm mini jack
- Microphone: built-in
- 1 x button
- 1 x IR receiver - possible control via remote control
- Compatible with Raspberry Pi chassis
- Dimensions: 85 x 56 mm
| Pin number | Pin name | Pin number | Pin name |
| 1 | SYS_3.3V | 2 | VDD_5V |
| 3 | I2C0_SDA / GPIOA12 | 4 | vDD_5V |
| 5 | I2C0_SCL / GPIOA11 | 6 | GND |
| 7 | GPIOG11 | 8 | UART_TX / GPIOG6 |
| 9 | GND | 10 | UART1_RX / GPIOG7 |
| 11 | UART2_TX / GPIOA0 | 12 | GPIOA6 |
| 13 | UART2_RTS / GPIOA2 | 14 | GND |
| 15 | UART2_CTS / GPIOA3 | 16 | UART1_RTS / GPIOG8 |
| 17 | SYS_3.3V | 18 | UART1_CTS / GPIOG9 |
| 19 | SPI1_MOSI / GPIOA15 | 20 | GND |
| 21 | SPI1_MISO / GPIOA16 | 22 | UART2_RX / GPIOA1 |
| 23 | SPI1_CLK / GPIOA14 | 24 | SPI1_CS / GPIOA13 |
| 25 | GND | 26 | SPDIF-OUT / GPIOA17 |
Package contents:
- 1 x Mini Shield for NanoPi NEO Core / Core 2
- 1 x NanoPi K2 enclosure with mounting hardware
- 1 x SSD mounting screw
Useful links |
