- EOL
|
Attention! The sale of the product has been completed.Check the new version! |
Charger/unloader with built-in balance of REDOX BETA cells, is an excellent proposal especially for beginners and intermediate modelers looking for a simple and economical charger for everyday use, in the version powered by 12V. In addition, the set includes an AC adapter, thanks to which you can power the charger not only from a 12V source but also from a 230V socket. Packed in an attractive box with a description in Polish, the charger supports LiPo, LiIon and LiFe cells and packages (with the possibility of balancing the cells), and NiCd, NiMH and Pb cells and packages, charging up to 5A.
Characteristics:
Dimensions: 113 x 65 x 23 mm
Operating voltage: DC 11.0~18.0 V or AC/DC power supply 230V 5A
Output power: max. charging power 50W, max. discharge power 5W
Charging current: 0.1-5.0A
Discharge current: 0.1-1.0A
Balancing current: 300 mAh/fire
Number of NiCD/NiMH cells supported: 1-15 cells
Number of Li-Po/Fe/Ion cells supported: 1-6 cells
Batteries supported Pb: 2-20V
Weight (without wires): 195 g
Built-in charger memory: max 5 packs
Packet Cycling Function
4 programming buttons
Built-in sockets:
sockets for balancer adapter + 2-6S adapter
sockets for the DEAN plug for charging (corresponding guides are included)
Jack type socket (12V DC power supply)
Jack for optional temperature sensor
USB port
Set contents:
Redox Beta charger
12V DC power cord (Jack - Crocodile)
AC/DC power supply 230V 5A
1 x Gold adapter 4 mm - DEAN plug
Additional extension adapters for Gold 4 mm adapter - DEAN plug:
1 x adapter DEAN socket - Crocodiles
1 x adapter DEAN socket - Servo socket (futaba type)
1 x adapter DEAN socket - Candle holder (for charging 1.5V clips)
1 x adapter DEAN socket - BEC socket
Operating instructions in Polish
Specification
- Power supply voltage: 12 - 18 V DC
- LCD display with backlight
- Type of cells to be charged: LiPo, LiFe, LiIon, NiMH, NiCD, Pb
- Support for 1-15 NiCD and NiMH cells
- Support for 1-5 LiPo, Li-Ion, Li-Fe cells (with balancer)
- Support 1-10 cell Pb
- Charging current: 0.1 - 5.0 A with 0.1 A pitch
- Discharge current: 0.1 - 1.0 A in pitch 0.1 A
- Power output:
- Charges 50 W
- 5W discharge
- Balancer: 300 mAh per cell
- Delta-Peak detection control / maximum capacity / temporary disconnection
- The packages can be operated by factory programs as well as manual programming of the charger
- Manual packet discharge mode, cyclic mode, fast mode for fast charging and storage mode for charging before storing packets for longer periods of time
- Built-in charger memory: max. 5 packages
- 4 programming buttons
- Built-in sockets:
- sockets for balancer 2s, 3s, 4s, 5s, 6s,
- sockets for 4mm gold plugs
- Jack type socket (12 V DC power supply)
- socket for an optional temperature sensor
- Dimensions: 134 x 80 x 28 mm
- Weight (without wires): 265 g
Description
Greenbox GPX Extreme is an advanced microprocessor-based charger/unloader with a built-in lithium cell balancer. Thanks to a large number of personalized programs and a set of connectors and adapters, charging NiCD, NiMH, LiPo, Li-Ion and Pb packages is a simple and safe operation. The clear display, intuitive user interface and instructions in Polish allow you to select appropriate parameters and constantly monitor the battery status during charging. The set includes a mains adapter, which enables direct connection of the device to a power outlet.
Set composition
- Greenbox GPX charger
- AC/DC power supply 230V 5A
- 12V DC power cord (female jack - crocodile)
- 1 x Gold adapter - T-dean
- Additional extension adapters:
- T-dean<->servo socket (futaba type),
- T-dean<->candle dummy (for charging 1.5V clips),
- T-dean<->BEC socket, T-dean<->crocodile,
- T-dean<->Tamiya
- T-dean<->Mini Tamiya
- Operating instructions in Polish
