• EOL

Arduino Yun Mini WiFi - module A000108

Index: ARD-04244 EAN: 8058333491844

Connecting Arduino and Linux allows, via wi-fi network, to wirelessly program and control the device. The module is based on a ATmega32u4 and has 32 KB of Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, 7 of which can be used as PWM channels and 12 as analog inputs and interfaces, including USB. This version features small size: 72 x 23 mm.

Arduino Yun Mini WiFi - module A000108
€58.90
€47.89 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Arduino

Attention!

The product has been discontinued. Check others products incategory.

Description

Yun in mini versions is the connections of the Arduino Leonardo, the controller AtherosAR9331 and the handling ofwi-fi. The board contains an ATmega32u4 microcontroller with 20 digital inputs/outputs, 7 of which can be used as PWM outputs (e.g. to control engines), and 7 as analog inputs. The system works with the signal ticking with the frequency of 16 MHz, has 32K Flash and 2.5 KB RAM SRAM.

 

With the help of AVR system along with the library Bridge accessible from the level of environment Arduino IDE, Arduino Yun can be in a simple way, wirelessly, via wi-fi network, programmed, configured, or modified and the status of pins can be read. After connecting the power supply (5 V viapower supply unitwith micro USB connector) the module is visible on PC as a wi-fi network with the name Arduino Yun.

 

This version features small size: 72 x 23 mm. Has soldered male connectors on the bottom and female connectors on the top.

Arduino Yun mini - Wifi - modułThe subject of the sale is the original product for Arduino, Botland isthe official distributor of this company.

 

Key features

Below are a few features that distinguish modules Arduino compared to other programmable tiles.

 

NameDescription

Installed

bootloader

Thanks to bootloader, for unit programming are necessary only the appropriatemicro usb cableandthe software from the manufacturer's website.

Small

size

This version features small size: 72 x 23 mm. Hs soldered male connectors on the bottom and female connectors on the top.

Connection

Wi-fi

Arduino Yun can be in a simple form, wirelessly, via wi-fi network, programmed, configured, or modified and the status of I/O can be read.

Digital I/O

20 digital inputs/outputs allow, in particular, controlling LEDs, relays and reading the buttons' states.

Efficiency

current

The maximum power load for a single I/O is 40 mA.

Output

PWM

7 PWM outputs allow e.g. to control motors and brightness of the LEDs.

Analog inputs

12 inputs of built-in digital-analog converter with a resolution of 10-bit, support, in particular, sensors with analog output.

Serial communication

The device supports popular communication interfaces, including UART, I2C and SPI, and USB.

Memory

built-in

The Atmega32u4 system has the signal clock frequency of 16 MHz and has 32 KB Flash memory 1 KB EEPROM, 2.5 KB of RAM SRAM.

Supply 5 V

microUSB

To power the Arduino you can usea power sourcewith a voltage of 5 V with a microUSB connector.

Power

USB port

The tile can be powered from a computer via microUSB cable, bearing in mind that the maximum load current for the USB port is 500 mA. Arduino has a system that protects the socket from short-circuit and the flow of too high current.

Connector

ICSP

The module has ICSP I/O for connecting an externalAVR programmer.

Pin

IOREF

The IOREF Pin provides direct access to the voltage to which output I/O work.

Built-in

led

The connected led on pin 13 allows debugging simple programs.

Output

3.3 V

Built-in voltage regulator provides power to external devices with the voltage of 3.3 V with current consumption of 50 mA.

 

Specification

  • Supply voltage: 4.75 V to 5.25 V
  • Current consumption: 1 A
  • Microcontroller:ATmega32u4
    • Maximum clock frequency: 16 MHz
    • SRAM: 2.5 KB
    • Flash memory: 32 KB (4 KB is reserved for bootloader)
    • EEPROM: 1 KB
    • I/O Ports: 20
    • PWM outputs: 7
    • Number of analog inputs: 12 (channels of converter A/C with 10 bit resolution)
    • Serial interfaces: UART, SPI, I2C
    • External interruptions
  • Linux processor:AtherosAR9331
    • Architecture:MIPS 400 MHz
    • Supply voltage: 3.3 V
    • IEEE 802.3 Ethernet 10/100 Mbit/s
    • Wi-fi IEEE 802.11 b/g/n
    • RAM: 64 MB DDR2
    • Flash memory: 16 MB
  • MicroUSB socket
  • Tile size: 72 x 23 mm
  • Weight: 16 g

 

Programming

Through the use of system proxy ATmega32u4, programming Arduino Yun is as easy as programmming other modules of this family.Environment of Arduino IDE contains a specially prepared library Bridge for module Yun called the Arduino IDE.

Block diagram for module Arduino Yun.

 

 

 

Arduino Yun Mini - wifi moduł

In our offer are also availableArduino YunandArduino Yun PoE.

 

Voltage to 5.0 V
Voltage from 5.0 V
Voltage output from 5.0 V
Output voltage to 5.0 V
Nominal output voltage 5.0 V
UC - Microcontroller Atmega32U4
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2,5 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 12
UC - freq 16 MHz
UC - A/C 10-bit
UC - PWM 7
UC - WiFi yes
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: