- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The device enables monitoring different physical parameters through the GSM network and a remote control of 5 outputs. It has digital inputs and communication lines: 1-wire (RJ11) SPI I2C UART. Controlling can be carried out via text, data transfer or remote web server, for example www.thingspeak.com. It is also possible to use stationary through a USB connector.
Examples of application
- Watchdog ISP for checking Ethernet and resetting devices
- Temperature control in rooms
- Remote control of lighting
- Managing turning on and off using a wall switch or remotely
- Monitoring the supply voltage and switching to the backup source
- Remote control of distant devices
- Measurement of the operation of solar panels, wind turbines etc.
- Battery charging control
- Measurement of power consumption by DC receivers
- Monitoring and control of temperature and humidity in greenhouses
- and many others
Specification
- Supply voltage: 6V to 28V, DC 5,5/2,1 mm
- Power consumption: 0.3 W no transmission
- GSM module: 900 / 1800 / 1900 MHz
- USB interface: virtual COM port
- 115200 b/s
- 8 bit
- 1 stop bit
- No parity, and flow control
- Interfaces:
- 1-wire (RJ11)
- SPI
- I2C
- UART
- 3 analog inputs
- 2 x with voltage from 0 V to 3.6 V
- 1 x with voltage from 0 V to 36 V
- 4 logic inputs: position sensors and pulse transmitters, max 20V
- 1 transistor output: control devices up to 1A
- 4 output open collector type, transistor BC847B (45V-100mA)
- Aerial: SMA, screw-on
- Reverse-polarity-protection
- Relay: 255V AC / 10A
- Operating temperature: -20°C to 70°C
- Dimensions: 68 x 66 x 48mm
- Weight: 89g
Useful links |
