- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Minicomputer UP with a powerful processorIntel Atom Cherry Trail Z8350 64-bit of 1.92 GHz. Board has4 GB of RAM DDR3L,32 GB of eMMC0, 12-core graphic processorIntel HD400 500 MHZ, Gigabit Ethernet port, HDMI port 1.4 b,4 x USB 2.0, 2 x USB 2.0 + 1 x UARTin the form of 10-pin leads ,the OTG USB 3.0 ports,40 GPIO, andthe CSI and DSI connectors. It hasIntel AESandIntel Idenity Protecton technologies. It works with the systemsAndroid 5.0,Windows 10andLinux: ubilinux, Ubuntu, Yocto.
|
Minicomputer works with Windows 10 - license must be purchased separately. |
What it takes to run minicomputer UP?
- USB Disk - medium that contains the system image to install.
- AC adapter:
- 5 V / 4 Afor the minicomputer
- HDMI cable- to connect the device to the monitor
- Mouse and keyboard - to control and input data into the device
Minicomputer UP works with Android, Windows 10, ublinux, Ubuntu, and Yocto. The device has 64 GB of eMMC.
Operating system
Minicomputer UP board works with the Android, Windows 10, ublinux, Ubuntu, and Yocto. The kit does not have a Windows license, it must be purchased separately.
The installation of the Windows operating system, is very simple, below is a brief instruction:
- To install Windows, you will need an external USB hard drive of at least 4GB, for example,the Flash Drive.
- On the disk, you should create a Windows image - the image can be downloaded from the official Microsoft website. It can be created with any program that can be found on the Internet or you can use the MediaCreationTool created by the Microsoft - on the websiteof Microsoft, available is installation instructions and download file.
- Next, you need to connect the drive to a USB port on minicomputer. When connected to the current, there should show the image of the installation.
- Before beginning the installation process, you must delete all partitions which are on the disk of minicomputer.
- The manufacturer has prepareda package of driversdesigned for minicomputer UP board.
Communication
Minicomputer UP has the main communication interfaces which can be found in office computers of PC class. The user has at his ore her disposal:
- four USB 2.0 connectors,to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
- Ethernet slot, that is the ability to directly connect to the LAN network.
- GPIO x 40 pin - outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers or engines. Among them are the pins supporting interfaces: I2C, SPI and UART.
Power
As a power source, the system uses the DC 5,5 / 2,1 mm connector.Manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and an output current of the used adapter shall be not less than 4.0 A. In our assortment, you will finda special power adapter.
Specifications and comparison
| Basic information | |
|---|---|
 |
|
| Model | UP Board 4 GB / 32 GB |
| Edition | 2017. |
| Technical specification of | |
| The core |
Quad-Core Intel Atom Cherry Trail Z8350 |
| Operating systems |
Android, Windows 10, ublinux, Ubuntu, Yocto. |
| Clock frequency | 1,92 GHz |
| RAM | 4GB DDRL3 |
| Memory | 32GB eMMC |
| GPIO slot |
Connector 40-pin (2x20 pin) 2.54 mm pitch |
| Power |
5.0 V / 4 A through the socket DC 5,5 /2,1 mm |
| Board sizes | 85.6 x 56.5 x 25 mm |
| Interfaces | |
| USB interface | 4x USB 2.0 - slot type a |
| Network interface | Ethernet port 10/100/1000 Mbit / s |
| The Wi-Fi Interface | - |
| Bluetooth | - |
| Camera | the CSI slot |
| Touchscreen display | slot for DSI |
| Video | HDMI 1.4 b |
| Communication |
UART, SPI, I2C, GPIO, PWM, PCM / I2S. |
| The rest |
USB 3.0 OTG, 2x USB 2.0 A 10 pin leads, RTC battery, the Power button |
