- EOL
Description
EL Home WS-45H1 module allows remote turn-on of four independent electric devicesand creating and setting upschedules. Communication viaWi-Finetwork. It has light signalisation. Maximum load of3,600 for all channels and 1800W per channel. The module uses the eWeLink smartphone app supported by iOS and Android. It can be mounted on a DIN rail.
Connection
The module has six inputs in the form of screw terminal block connectors, to which you can connect wires using a screwdriver:
- L IN - connector for power supply 230 V
- L1 - L4 power connectors of the managed devices
- E -connector for connecting protective wires
- N - connectors for connecting neutral wires
The device has screw terminal block connectors for wiring
Setting-up
To connect the device to your home Wi-Fi network, you need to install the app on your smartphone, register the number in the network, connect with the device, and set up network settings. Details can be found in the manufacturer's manual.
Using Android Play or the AppStore you need to download the eWeLink application. If the Wi-Fi network was configured correctly, the module will be automatically identified in the app. Relay status can be easily switched using the buttons in the app.
Specification
- Supply voltage: 230V AC
- Load:
- Single channel: up to 8A (1800W)
- Total for all channels: up to 16A (3600W)
- Max output: 3600W
- Humidity: 5% to 90% RH
- Operating temperature: od0ºC to 40ºC
- Standard: 802.11 b/g/n
- Security: WEP, WPA-PSK / WPA2-PSK
- Mounting: DIN rail
- Case material: plastic
- Protection: IP20
- Dimensions: 145 x 90 x 41 mm
- Weight: 195 g
Useful links |
