• EOL

NanoPi M1 - Allwinner H3 Quad-Core 1,2GHz + 1GB RAM

Index: NNP-07016

NanoPi mini-computer in M1 version with 1.2 GHz Allwinner H3 quad-core ARM Cortex-A7 processor. The board has 1 GB of DDR3 RAM memory, built-in Ethernet port, HDMI port and three USB ports, 40 GPIO, microSD card slot. Works with Ubuntu Mate and Debian systems.

NanoPi M1 - Allwinner H3 Quad-Core 1,2GHz + 1GB RAM
€24.90
€20.24 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: OEM

Attention!

The sale of the product has been completed. Check others in thiscategory.

Description

NanoPimini-computerin M1 versionwith1.2 GHzAllwinner H3 quad-coreARM Cortex-A7processor. The board has1 GB ofDDR3 RAM memory,built-inEthernetport,1080pHDMI port and threeUSB ports, 40GPIO,microSD card slot. Works withUbuntu Mate and Debiansystems.

Nano Pi M1 - Allwinner H3 Quad-Cor


The advantage of the board is its small dimensions, the outline fits into a 64 x 56 mm rectangle.

What do you need to run a NanoPi minicomputer?

Operating system

NanoPi works with the Debian and Ubuntu Mate systems. The disk of the device can be a microSD card, which can be purchased in our shop.

Operating systems can be downloaded fromthe manufacturer's website.

The manufacturer also provides asystem installation guide.

Communication

The minicomputer has basic communication interfaces that can be found in PC-class office computers. In addition to the previously mentioned audio and video interfaces, the user has the possibility to use them:

  • three USB connectors,under which you can connect e.g. mouse, keyboard, WiFi card or flash drive. If it turns out that there are too few connections, you can increase their number usingan external USB HUB.
  • Ethernet socket, i.e. the possibility of direct connection to the LAN.
  • GPIO x 40 pin- general purpose outputs/inputs that can be used to operate LEDs, buttons, motor controllers. Among them there are pins supporting interfaces: I2C, SPI and UART.
  • microSD slot- slot for a microSD memory card, on which the operating system can be installed.
  • HDMI connector- transmits video to the monitor.

Nano Pi M1 - Allwinner H3 Quad-Cor

The device has 2 USB ports, HDMI and Ethernet port and many others.

Power supply

The system uses the microUSB connector as the power source. The manufacturer recommends that the voltage given on the connector should be 5.0 V, while the current capacity of the power supply used should be at least 2.0 A. In our offer you will findpower supplies meeting these parameters, e.g.:Extreme 2.1 A power supply.

Starting set

The manufacturer has prepared aset of sensors and modules in a handy trunk, which makes it easy to start working with a mini-computer.

Matrix Starter Kit - zestaw startowy dla NanoPi i Raspberry PiContents of theMatrix Starter Kit- available separately.


Specification

Model NanoPi M1
Specification
Processor Allwinner H3
Core

Quad-Core ARM Cortex A7

Graphics

Mali400MP2 600MHz, OpenGL ES2.0

Systems

Debian

Ubuntu Mate

Clocking 1.2 GHz
Memory RAM

1 GB

Memory

microSD card

GPIO socket

40 pins, Raspberry Pi compliant

Power supply

5 V / 2 A - microUSB

Dimensions of the tiles 64 x 56 mm
Interfaces
USB Host

3 x USB 2.0

Network interface Ethernet 10/100 Mbps
Video HDMI 1.4 1080p
Audio

HDMI / 3.5 mm jack, built-in microphone

Communication

UART, SPI, I2C, GPIO, PWM

Debugger

Serial port 4pin / 2.54mm

Additional

Reset button, built-in LED, built-in infrared receiver

UC - core 4. Quad Core
UC - External memory microSD card
UC - HDMI yes
UC - I2C yes
UC - UART yes
UC - Connector 5V microUSB
UC - SPI interface yes
UC - LCD interface no
UC - Camera interface yes
UC - Linux yes
UC - Android no
UC - Windows no
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: