Product description: Filament Polymaker PolySonic High Speed PLA 1.75 mm 1 kg - Red
PolySonic High Speed PLA from Polymaker is a revolutionary filament for high-speed work. Thanks to lightning-fast extrusion speed , state-of-the-art precision and exceptional layer adhesion , it brings your printer's productivity and print quality to a higher level . Wound on a spool, it weighs 1 kg and has a diameter of 1.75 mm . The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from external suppliers.
Filament Polymaker PolySonic High Speed PLA 1.75 mm 1 kg - Red.
PolySonic High Speed PLA from Polymaker is a revolutionary filament for high-speed work.Advantages of using High Speed filament
- Excellent surface quality - when printing at high speed, the nozzle range is very wide. With Polymaker filament, which allows for higher speeds, differences in extrusion temperature are minimized. This helps to obtain a uniform surface without any imperfections.
- Better mechanical properties - PolySonic High Speed material is characterized by much better mechanical properties during faster printing. This is achieved by more uniform extrusion and optimized cooling/melting rate of the polymer.
- Increased throughput - thanks to the benefits described above, it is possible to achieve higher printer throughput. Combined with excellent surface quality and mechanical properties, it allows for printing elements of very good quality.
Suggested filament printing parameters
| Printing temperature | From 190°C to 230°C |
| Fast printing temperature | From 210°C to 230°C |
| Table temperature | From 25°C to 60°C |
| Cooling | Recommended |
| Due to differences in the design of printers, the above data should be treated as guidelines and the appropriate values should be determined experimentally. |
Technical specifications and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75mm |
| Color | Ed |
| Print speed | From 50 mm/s to 100 mm/s |
| Printing temperature | From 190°C to 230°C |
| Fast printing temperature | From 210°C to 230°C |
| Table temperature | From 25°C to 60°C |
| Material density | 1.31 g/cm³ |
| Spool - material | PolySonic High Speed PLA |
| Desiccant | Yes |
| Vacuum packaging | Yes |
| Net weight | 1 kg |
Useful links |
