- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
A bipolar stepper motor, four wired. It has a resolution of 200 steps per revolution (1.8 degree). It is supplied with the voltage of 12 V, consumes a current of 1700 mA per coil. The holding torque is 4 kg*cm (0.39 Nm). The output shaft is 4 mm diameter.
Connection
The motor is two-phased, so it does not matter, if we replace the connection between the coil A and coil B. Black and green must be connected to A or B, red and blue to B or A. Changing that will change the direction of rotation of the motor shaft.
A+ Black; A+ Green
A - Green or A- Black, both devices are connected properly
Accessories
In our store there are also accessories for the convenient operation of stepper motors:
- Mounting hum 5 mm- enables to install the mechanical elements on the motor shaft
- Stepper motor driver - easy to use, small modules to control the direction, speed and resolution. We have also prepared amanual for connecting different types of stepper motors.
Application of stepper motors:
- printer
- CNC device
- 3D printer
- laser devices
- manipulators
Specification
- Resolution: 200 steps/Rev (with 1.8 °)
- Rated voltage[v]: 12 V
- Consumption current per coil: 1.7 A
- Coil resistance 1.5 Ohm
- Inductance coil: 2,8 mH
- Holding torque to 4.0 kg*cm (0.39 Nm)
- Rotor inertia: 54 g*cm2
- Outputs: the connectors of the LEAVES (4 wires)
- Insulation class: B
- Shaft diameter: 4 mm
- Weight: 290 g
- Dimensions: 41.5 x 42 x 42 mm (without shaft)
Dimensions
Example usage
Useful links |
