- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Odyssey X86J4105864 - Intel Celeron J4105+ATSAMD21G18 8GB RAM 64GB eMMC WiFi+Bluetooth - Seeedstudio 102110397
Odyssey X86J4105864is a minicomputer produced bySeeedstudio. The platform is based on IntelCeleron J4105processor with1.5 GHz to 2.5 GHzwithIntel UHD Graphic 600chip and ATSMAD21G18 Cortex M0coprocessor. There is8 GB of RAMand64 GB of eMMC memoryon board. The board has a built-in 2.4GHz / 5GHz dual bandWiFi chipandBluetooth 5.0. There are alsoRaspberry Picompatible 40-pin GPIO connectors and ATSAMD21Arduino28-pin GPIO connectors. The minicomputer is equipped with two Gigabit Ethernet connectors, audio inputs and outputs, two USB 2.0 ports, one USB 3.0 port, a USB C-port for power supply, HDMI, SATA, PCI-e andmicroSDand SIMcardslots. Alarge heat sinkis mounted on the bottom of the boardtogether with a fanfor efficient heat dissipation.
Introduction of the Odysstey X86J4105 mini-computer.
Three versions available in the offer:
|
What do you need to run the Odyssey X86J4105 minicomputer?
- A power supply:
- 12 V / 2 A - 5.5 / 2.1 mm DC jack or USB type C (power supply with DC plug included)
- HDMIorUSB Ccable- to connect the device to a monitor
- Mouse and keyboard- to navigate the system interface and enter data
- Connected internet - for software download
Front panel of the minicomputer.
Operating system for Odyssey
The minicomputer works withWindows and Linux.The system can be installed on the built-in 64 GB eMMC memory. You have to create a bootable USB drive with the system and then install it on the Odyssey X86J4105.
Presentation of the work of a minicomputer with Windows.
Communication in Odyssey X86J4105
The Odyssey X86J4105 is equipped with basic communication interfaces that can be found in typical PCs. The user has it at his disposal:
- three USB connectors(2x USB 2.0, 1x USB 3.0), under which you can connect peripheral devices such as mouse and keyboard, as well as a USB stick to install the operating system. The number of ports can be extended using e.g.HUB USB.
- Ethernet ports,the possibility to connect to the LAN using a cable, the maximum data transfer speed is 1000 Mbps.
- GPIO 40-pin and 28-pin GPIOconnectors are compatible with Raspberry Pi and Arduino. They can be used to connect various sensors, diodes, motor controllers. They include popular interfaces such as: I2C, SPI, UART.
- MicroSD / SIM / SATA / PCI-e slots,allow to place SIM card for communication in 4G network (with optional overlay), microSD card, SSD or M.2 drive as a memory carrier.
Connectors layout on the Odyssey X86J4105 board.
Minicomputer power supply
Minicomputer Odyssey X86J4105 has two connectors for power supply:USB type CandDC 5.5 / 2.1 mm. The USB C connector supports Power Delivery, the power supply voltage should be12 V,while its current capacity should not be less than2 A. In the case of power supply via the DC 5.5 / 2.1 mm connector, the voltage should bebetween 12 V and 19 V, and the current capacity should be min.2 A. A DC 5.5 / 2.1 mm power supply is included.
Rear panel of minicomputer including microSD / SIM card slot as well as USB 3.0, USB C and mini jack.
Specification and comparison of Odyssey X86J4105 minicomputers
Technical Specification | ||||
---|---|---|---|---|
Model | Odyssey X86J4105800 -102110399 | Odyssey X86J4105864 - 102110397 | Odyssey X86J4105864 -102110398 | |
Basic information | ||||
Processor |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
Intel Celeron J4105 1.5 GHz to 2.5 GHz |
|
Coprocessor | ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
ATSAMD21G18 32-bit ARM Cortex M0+ |
|
Graphics |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
Intel UHD Graphic 600 from 250 MHz to 750 MHz |
|
Memory RAM | LPDDR4 8 GB | LPDDR4 8 GB | LPDDR4 8 GB | |
Internal memory | No | eMMC 64 GB | eMMC 64 GB | |
Operating system | Windows, Linux | Windows, Linux | Windows 10 Enterprise activated | |
Wireless communication | WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
WiFi 802.11 a/b/g/n/ac dual band 2.4 GHz / 5 GHz HT160 Bluetooth 5.0 |
|
Network | Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
Intel I211AT PCIe Gigabit LAN Supports Wake-On-LAN and PXE |
|
Dimensions | 110 x 110 mm | 110 x 110 mm | 110 x 110 mm | |
Interfaces | ||||
Audio |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
Mini jack 3.5 mm Microphone + headphones |
|
Connections |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 connectors 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
1x 40-pin compatible with Raspberry Pi 1x 28-pin SAMD21G18 chip connector 3x 4-pin SATA power supply 1x 4-pin power supply and switch |
|
USB |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
2x USB 2.0 Type A 1x USB 3.0 Type A 1x USb 3.1 Type C |
|
Video |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
HDMI 2.0a: up to 4096 x 2160 px / 60 Hz 24 bpp DP1.2A: up to 4096 x 2160 px / 60 Hz 24 bpp |
|
Extension slots |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
M.2 (Key B, 2242/2280): SATA III, USB 2.0 MicroSD SIM SATA III |
|
RTC | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | JST 1.0 CR2032 3 V (supplied) | |
TPM | Built-in TPM (2.0) | Built-in TPM (2.0) | Built-in TPM (2.0) | |
Power supply | DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
DC Jack 5.5 / 2.1 mm or USB type C PD DC Jack: 12 V to 19 V / 2 A USB type C: 12 V / 2 A |
The set includes
- Minicomputer Odyssey X86J4105864
- WiFI + Bluetooth antenna and 5 GHz WiFi antenna
- SATA adapter
- RTC
- 5.5 / 2.1 mm DC power supply
Useful links |