- EOL
Attention! The product has been discontinued. Check other products incategory. |
Product description: Odroid Go Advance Black Edition - set of elements for console construction - Aura Black.
A set containing elements for building a portable console based on theRockchip RK3326processor with 1 GB of RAM, 3.5" display andESP-WROOM-S2 WiFimodule. The console is powered by a3.7VLi-Pol battery. It supports many emulators of popular consoles. The whole closed in a black casing. Self-mounting kit.
Odoid Go Advance Black Edition kit contents
Contents of the Odroid go Advance Black Edition.
Set contents | |
---|---|
A | USB cable type A |
B | Upper body |
C | Lower case |
D | L / R / L2 / R2 and X, Y buttons and power buttons |
E | Buttons D-Pad and buttons A, B |
F |
Odroid GO Advance motherboard |
G | Li-Pol 3000 mAh battery |
H | High-speed LCD screen |
I | Erasers for buttons I ~ VI |
J | Eraser D-Pad |
K | Eraser for buttons A, B, X, Y |
L | Sticking tape for batteries |
M | Analogue joystick |
N | 3.5" TFT LCD screen 320 x 480 px |
O | Speaker 0.5 W |
P | Screws 1,7 x 5 - 7 pcs. |
Q | Screws 1,7 x 8 - 4 pcs. |
R | Screwdriver |
Installing software on Odroid Go Advance
Mini console Odroid Go Advance Black Edition usesa microSD card(not included) as a storage medium. The card must be loaded with the operating system prepared by the manufacturer.
The manufacturer provides animage of the system, which should be uploaded to the card through an appropriate program, e.g. Etcher.The manufacturer has also prepared ashort guide for uploadingthe system to the card. |
Supported emulators
- Atari 2600
- Atari 5200
- Atari 7800
- Atarilynx
- Game Gear
- GameBoy
- GameBoy Advance
- GameBoy Color
- Sega Master System
- Sega Mega Drive
- Nintendo Entertainment System
- PC Engine / TurboGrafx-16
- PC Engine CD
- PlayStation X (PSX)
- Sega Genesis
-
Super Nintendo Entertainment System
- PlayStation Portable (PSP)
- anymore
- Some games will not work at full speed
Details of the Odroid Go Advance insert
Details of the tiles | |
---|---|
A | The PMIC (RK817) acts as a charger and controls audio |
B | D-Pad buttons |
C | Buttons I to VI (F1, F2, F3, F4, F5, F6) |
D | Buttons X, Y, A, B |
E | Left trigger 2 |
F | Right trigger 2 |
Details of the tiles | |
---|---|
A | CPU: RockChip RK3326 Quad-Core ARM Cortex-A35 1.3 GHz GPU: Mali-G31 Dvalin |
B | 1 GB DDR3L 786 MHz, 32-bit |
C | Flash memory 16 MB |
D | MicroSD memory card slot |
E | Forced start from microSD card (without SPI ROM) |
F | UART port (not mounted by default) |
G | Speaker connector |
H | Battery connector |
I | USB Type A host |
J | Status LED (charging, operation, power) |
K | USB C connector for power supply |
L | 10-pin expansion port |
M | Audio jack connector |
N | 20-pin LCD connector |
O | PWR switch |
P | Analogue joystick connector |
Q | Left hand trigger |
R | Right-hand trigger |
S | ESP-WROOM-S2 WiFi communication module |
Console specifications Odroid Go Advance Black Edition
- Processor:
- CPU: RockChip RK3326 Quad-Core ARM Cortex-A35 1.3 GHz
- GPU: Mali-G31 Dvalin
- RAM: 1 GB DDR3L 786 MHz, 32 bit bus width
- SPI flash memory: 16 MB
- MicroSD memory card slot: UHS-1
- Display: LCD TFT 3.5" 320 x 480 px (MIPI interface, ILI9488)
- Audio: jack connector, speaker 0.5 W 8 Ω Mono
- Power supply: Li-Pol 3.7 V / 3000 mAh battery, up to 9 hours of continuous play
- USB type C connector, USB cable included
- External I/O: USB 2.0 host, 10-pin port (I2C, GPIO, IRQ 3.3 V)
- Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, D-Pad, Left trigger, Right trigger, Left trigger 2, Right trigger 2, Analogue joystick
- Wireless communication: 2.4 GHz WiFi 802.11 b/g/n - ESP-WROOM-S2
- Power consumption: from 300 mA to 550 mA while playing (depending on lighting and game), up to 1 mA in sleep mode
- Charging time: from 2.5 h to 3 h with the device off and from 4 h to 5 h while playing
- Case colour: black (Aura Black)
- Dimensions: 155 x 72 x 20 mm
- Weight: 160 g
Diagram RK3326
Useful links |