- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Ready module that allows youto control the brightness of light 230 Vviawi-fi networkusing theapp on your smartphonefrom anywhere in the world. In order to use BleBox, it is sufficient to configure the device via web browser. Compact dimensions enable to close the module inthe junction box.
The device hasthreaded connectionfor mountingthe wires.
Wiring diagram
Before connecting, switch off the voltage in a powered circuit. A driver must be installed in a place protected from the external conditions, protected from access by third parties.
Wiring diagram
The module has four leads-in in the form of bolted connectors, to which you can connect the wires with a screwdriver:
- OUT -output voltage for light.
- L- power supply 230 V, the positive pole.
- N- power, the neutral wire - ground.
- S1- connecting an external switch.
- S2- connecting an external switch.
Configuration
You need to connect to a wireless network of the device, called "gateBox-xxxxxxxx" where "xxxxxxxx" is the serial number of the device,then use the storeAndroid Playorthe AppStore to download the applicationwBox - control everything. After the application starts, at the top of the screen, your devicewill display, next to the name will be the " + " sign. To prestage devices, you must click the default name of the device.
Configuration can be done via the website - for this you need to connect to a wireless network of the device, then, just launch the internet browser and enter the IP address of the device:http://192.168.4.1.A configuration page will appear where you must select your home wi-fi network and enter the password.
Specification
- Supply voltage: 230 V
- Maximum power: 250 W
- Number of inputs: 2
- Type of inputs: closed to the N Logical
- The type of control outputs: the phase on the output
- DimmerBox is not adapted for operation in two-wired system on account of variable slope
- Degree of protection: IP20
- Protection: reverse polarity, ESD
- Connection standard: µWiFi, compatible with 2.4 GHz wi-fi
- Mode of operation:
- direct connection (as Access Point)
- wi-fi connection through a standard router
- connection with access from anywhere via the Internet
- Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
- The case is made from a polyurethane composition containing no halogen - self-snuffing for the thermal protection class B (130 °C)
- Dimensions: 48 x 38 x 23 mm
Useful links |
