- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
The e-paper display with a diagonal of 7,5" in E-Ink technology with a resolution of 640 x 384 px. Works with a voltage of 3.3 V. Communicates through the SPI interface. Display supports 3 colors: black, white and red. This kind of displays can be used for reading e-books and e-journals. Displays 3 colors: black, white and red. The set has HAT shield forRaspberry Pi.
The sale includes display with HAT shield, minicomputerRasberry Pimust be purchased separately.
|
The product is compatible with Adruino and Raspberry The manufacturer provides auser's guidefor Arduino and Raspberry Pi. |
To connect the system with the module operating with a voltage of 5 V, for example,the Arduino, you must usea voltage converter.
Pins
The main module has 8-pin connector.
| Pin | Description |
|---|---|
| VCC | Supply voltage: 3.3 V |
| GND | The mass of the system. |
| DIN | Pin MOSI of SPI interface. |
| CLK | Clock pin of the SPI interface. |
| CS | Chip select is activated with low status. |
| DC |
Selection data / commands. High status - data Low status - commands |
| RST | External reset is activated with low status. |
| BUSY | "Busy" status' output, activated with the low status. |
Specification
- Supply voltage: 3.3 V
- Supply power: 38 MW
- Interface: SPI
- External dimensions: 170 x 111,2 x 1.18 mm
- Display size: 163,2 x 97,92 mm
- Pixel: 0,255 0,255 mm x
- Resolution: 640 x 384 px
- The gray level: 2
- Displayable color: black, white and red
- Viewing angle: 170 °
Useful links |
