- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
3D printer by Anet is designed to print elements with dimensions of300 x 270 x 220 mm. The printer dimensions are: 495 x 440 x 405 mm. The set consists of elements for self-assembly.
The subject of the sale is the original printer by 3D Anet.
The printer has a nozzle with a diameter of 0.4 mm and with active cooling fan. It supports popularfilaments ABS, PLA, etc. with a diameter of 1.75 mm.
Printing field and display
3D printer Anet E10 has the ability to print elements with dimensions of 300 x 270 x 220 mm. Large, easy to read display LCD12864 allows you to easily configure the print settings.
Easy to read display and large printing make the 3D Anet E10printer very easy to use.
Applied elements
The device was equipped with a large, easy to use LCD12864 display and metal nozzle of 0.4 mm in the form of the letter "I".Stepper motorensures long life and better heat dissipation. Motherboard, power supply and LCD display are housed in a single control module.Applied rails provide more stable and accurate printing. The printer frame is made of aluminum and provides high stability. The wing screws allow for precise adjustment of the desktoplevel. Thanks to special overlays on the table top, there is no need to use a spatula for peeling off the printed elements.
Structural elements of the printer Anet E10.
|
Attention! Before connecting the device it is necessary to assemble it in accordance withthe manufacturer's instructions |
| Technical specification | |
|---|---|
| Power supply: |
from 110 V-220 V (AC - AC) |
| Full power: | 250W |
| Display: | LCD12864 |
| Print speed: | from 40 mm/sec to 120 mm/sec |
| Prnting precision: | ± 0.1 mm |
| Print thickness: | from 0.1 mm to 0.4 mm |
| Nozzle diameter: |
standard: 0.4 mm alternative: 0.2 mm, 0.3 mm |
| Supported filament: |
PLA, ABS, HIPS, etc. |
| Diameter of filament: | 1.75 mm |
| Mode of operation: | Online or from the SD card |
| File format: | STL, obj, jpg |
| Software: | Cura |
| Print format | Gco, Gcode |
| Print size: |
300 x 270 x 220 mm |
| Nozzle temperature: | max. 250 °C |
| Temperature desktop: | max. 100 °C |
| The dimensions of the printer: | 495 x 440 x 405 mm |
| Weight: | 8 kg |
Included
- Printer (kit for self assembly)
- 2 x white PLA filament 30 g / 1.75 mm
Useful links |
