- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Product description: 3D Printer Anet E16
3D printer Anet E16 is designed to print features with sizes400 x 300 x 300 mm. The printer has an interface in English. The set consists of elements for self-Assembly.
The subject of the sale is the original printercompany 3D Anet.
The printer has a nozzle diameter of 0.4 mm, with active cooling fan. Supports popularfilamenty ABS, PLA, etc. with a diameter of 1.75 mm.
The field of printing and display in the printer Anet E16
3D printer E16 Anethas the ability to print features with sizes 400 x 300 x 300 mm. Large, easy to read LCD display allows you to easily configure the print settings.
Easy to read display and large printing make this printer a 3D Anet E16 easy to use.
Used items in Anet E16
The device was equipped in a large, easy to use LCD display and a nozzle of 0.4 mm.the Stepper motorensures long life and better heat dissipation. Motherboard, power supply and LCD display are housed in a single control module.Applied rails provide more stable and accurate printing. Frame of the printer is made of aluminum and provides high stability. Corner connectors eliminate vibration during printing. The wing and the screws allow precise adjustment of the level of the desktop. Desk was made of glass.
Structural elements of the printer Anet E16.
Differences in Anet E12
- The frame is made entirely of aluminum 2040
- Supports filamenty PLA / ABS / soft TPU
- Automatic charging and discharging filamentu
- Protection against overload and short circuit
- Use a corner bracket to reduce vibration
| Attention! The device before connecting it is necessary to collect in accordance withthe manufacturer's instructions |
| Technical specification of | |
|---|---|
| Power supply: |
from 110 V-220 V (AC - AC) |
| Full power: | 300 In |
| Display: | LCD |
| Print speed: | from 40 mm/sec to 120 mm/sec |
| Precision printing: | ± 0.1 mm |
| Print thickness: | from 0.1 mm to 0.3 mm |
| Nozzle diameter: |
standard: 0.4 mm |
| Supported filament: |
PLA, ABS, HIPS, etc. |
| Diameter filamentu: | 1.75 mm |
| Mode of operation: | Online or from the SD card |
| File format: | STL, obj, jpg |
| Software: | Kura |
| Print format | Gco, Gcode |
| Print size: |
400 x 300 x 300 mm |
| Nozzle temperature: | max. 250 °C |
| Temperature desktop: | max. 100 °C |
| The dimensions of the printer: | 594 x 500 x 486 mm |
| Weight: | 9.8 kg |
Included
- The printer (a set of elements for self-Assembly)
Useful links |
