- EOL
|
Uwaga! Sprzedaż produktu została zakończona. Sprawdź inne w tejkategorii. |
Description
Ready module that allows you to control two devices, including a230 Vpower up to1 kWviawi-fi networkusing theapp on your smartphonefrom anywhere in the world. In order to use Shelly2, it is enough to configure the module using web browser. The device hasthreaded connectionfor mounting the wires, the compact size allows the closure of the moduleinto the wilds of electrical engineering. There is also the possibilityof measuring the consumption of electricity.The module can also work as acontroller for roller shutters.
The device hasthreaded connectionfor mountingthe wires, the compact size allows the closure of the module into the wilds of electrical engineering.
Wiring diagram
Before connecting, switch off the voltage in a liquefied perimeter. A driver must be installed in a place protected from the weather protected from access by third parties.
Wiring diagram
The module has six introductions in the form of bolted connections, which can connect the wires with a screwdriver:
- N- power, the neutral wire to ground.
- S1- external switch for output O1, a second line switch should be connected to the line phase label symbols L
- S2- the external switch for output O2, the second line of the switch should be connected to the linephase label symbols L
- O1- the first voltage output relay.
- L- power supply 230 to the positive pole.
- O2- the second voltage output relay.
Setting
You need to connect to a wireless network device called "shellyswitch-xxxxxx" where "xxxxxx" is the serial number of the device,then use the storeAndroid Playorthe AppStoreyou need to download the application from Shelly. To prestage devices, you must click the default name of the device.
Can be set also via the website, for this you need to connect to a wireless network device, then just launch the Internet browser and enter the IP address of the device:http://192.168.33.1will Appear a configuration page where you must select your home wi-fi network and enter the password.
Specification
- Supply voltage: 100 V to 230 V AC (network)
- Energy consumption: less than 1W
- Number of outputs: 2
- The type of control output: relay
- Load current: 8 A output
- Load power: up to 1800 In the output
- Number of inputs: 2
- Input type: logical, closes on the line L voltage AC power
- The measurement of electric energy consumption
- Connection standard: wi-fi 802.11 b/g/n
- Mode
- direct connection (Access Point),
- wi-fi connection through a standard router
- connect with access from anywhere via the Internet
- Compatible devices: iPhone, iPad, iPad Mini, Android, computers and mobile devices with HTML5 support
- Module dimensions: 43 x 38 x 20 mm
Useful links |
